kexec-tools-2.0.29-2.el10 RPM for s390x

From CentOS Stream 10 BaseOS for s390x

kexec-tools provides /sbin/kexec binary that facilitates a new
kernel to boot using the kernel's kexec feature either on a
normal or a panic reboot. This package contains the /sbin/kexec
binary and ancillary utilities that together form the userspace
component of the kernel's kexec feature.

Provides

• kexec-tools
• kexec-tools(s390-64)

Requires

• libc.so.6()(64bit)
• libc.so.6(GLIBC_2.2)(64bit)
• libc.so.6(GLIBC_2.27)(64bit)
• libc.so.6(GLIBC_2.3)(64bit)
• libc.so.6(GLIBC_2.3.4)(64bit)
• libc.so.6(GLIBC_2.33)(64bit)
• libc.so.6(GLIBC_2.34)(64bit)
• libc.so.6(GLIBC_2.38)(64bit)
• libc.so.6(GLIBC_2.4)(64bit)
• liblzma.so.5()(64bit)
• liblzma.so.5(XZ_5.0)(64bit)
• libz.so.1()(64bit)
• libz.so.1(ZLIB_1.2.2.3)(64bit)
• rpmlib(CompressedFileNames) <= 3.0.4-1
• rpmlib(FileDigests) <= 4.6.0-1
• rpmlib(PayloadFilesHavePrefix) <= 4.0-1
• rpmlib(PayloadIsZstd) <= 5.4.18-1
• rtld(GNU_HASH)

License

GPL-2.0-only

Changelog

* Tue Oct 29 2024 Troy Dawson <tdawson@redhat.com> - 2.0.29-2
  - Bump release for October 2024 mass rebuild:
    Resolves: RHEL-64018
* Tue Aug 13 2024 Lichen Liu <lichliu@redhat.com> - 2.0.29-1
  - Update to 2.0.29
* Thu Jul 18 2024 Lichen Liu <lichliu@redhat.com> - 2.0.28-15
  - Resolves: RHEL-49401
* Fri Jul 12 2024 Lichen Liu <lichliu@redhat.com> - 2.0.28-14
  - Various fixes.
* Mon Jun 24 2024 Troy Dawson <tdawson@redhat.com> - 2.0.28-13
  - Bump release for June 2024 mass rebuild
* Wed Jun 19 2024 Tao Liu <ltao@redhat.com> - 2.0.28-12
  - Resolves: RHEL-40200
* Fri May 31 2024 Lichen Liu <lichliu@redhat.com> - 2.0.28-11
  - Re-apply upstream patches
  - Resolves: RHEL-37670
  - Resolves: RHEL-36415
* Fri May 31 2024 Lichen Liu <lichliu@redhat.com> - 2.0.28-10
  - Resolves: RHEL-37670
  - Resolves: RHEL-36415
* Mon Apr 29 2024 Lichen Liu <lichliu@redhat.com> - 2.0.28-9
  - Resolves: RHEL-29044
* Tue Apr 09 2024 Coiby Xu <coxu@redhat.com> - 2.0.28-8
  - Add a kdump-utils subpackage
* Sun Apr 07 2024 Coiby Xu <coxu@redhat.com> - 2.0.28-7
  - Release 2.0.28-7
* Sat Mar 16 2024 Coiby Xu <coxu@redhat.com> - 2.0.28-6
  - let kexec-tools depends on makedumpfile
* Fri Feb 23 2024 Carl George <carlwgeorge@fedoraproject.org> - 2.0.28-5
  - Add a makedumpfile subpackage
* Fri Feb 02 2024 Coiby Xu <coxu@redhat.com> - 2.0.28-4
  - kexec: don't use kexec_file_load on XEN
  - Fix building on x86_64 with binutils 2.41
* Wed Jan 24 2024 Fedora Release Engineering <releng@fedoraproject.org> - 2.0.28-3
  - Rebuilt for https://fedoraproject.org/wiki/Fedora_40_Mass_Rebuild
* Sun Jan 21 2024 Fedora Release Engineering <releng@fedoraproject.org> - 2.0.28-2
  - Rebuilt for https://fedoraproject.org/wiki/Fedora_40_Mass_Rebuild
* Wed Jan 17 2024 Coiby Xu <coxu@redhat.com> - 2.0.28-1
  - kexec-tools 2.0.28 (Simon Horman)
  - Use the same /etc/resolve.conf in kdump initrd if it's managed manually
  - dracut-module-setup: consolidate s390 network device config
* Mon Dec 11 2023 Coiby Xu <coxu@redhat.com> - 2.0.27-5
  - Let %post scriptlet always exits with the zero exit status
* Wed Nov 08 2023 Coiby Xu <coxu@redhat.com> - 2.0.27-4
  - update to makedumpfile-1.7.4
  - kdump-lib.sh: add extra 64M to default crashkernel if sme/sev is active
  - Allow _crashkernel_add to address larger memory ranges
* Tue Oct 17 2023 Coiby Xu <coxu@redhat.com> - 2.0.27-3
  - Only try to reset crashkernel when kdump.service is enabled
* Fri Oct 13 2023 Coiby Xu <coxu@redhat.com> - 2.0.27-2
  - update to latest upstream kexec-tools
* Tue Oct 10 2023 Coiby Xu <coxu@redhat.com> - 2.0.27-1
  - kexec-tools 2.0.27 (Simon Horman)
* Thu Aug 31 2023 Coiby Xu <coxu@redhat.com> - 2.0.27-1
  - kexec-tools 2.0.27 (Simon Horman)
* Thu Jul 20 2023 Fedora Release Engineering <releng@fedoraproject.org> - 2.0.26-8
  - Rebuilt for https://fedoraproject.org/wiki/Fedora_39_Mass_Rebuild
* Wed Jun 14 2023 Coiby <coxu@redhat.com> - 2.0.26-7
  - kdumpctl: Fix the matching of plus symbol by grep's EREs
  - kdump-lib: Evaluate the memory consumption by smmu and mlx5 separately
  - kdump-lib: add support for 64K aarch64
  - kdump-lib: Introduce parse_kver_from_path() to get kernel version from its path name
  - kdump-lib: Introduce a help function _crashkernel_add()
* Fri Jun 02 2023 Timothée Ravier <tim@siosm.fr> - 2.0.26-6
  - Make binutils a recommend as it's only needed for UKI support
* Mon May 29 2023 Coiby <coxu@redhat.com> - 2.0.26-5
  - Simplify the management of the kernel parameter crashkernel
  - Let _update_kernel_cmdline return the correct return code
  - mkdumprd: call dracut with --add-device to install the drivers needed by /boot partition automatically for FIPS
  - kdump-lib: fix the matching pattern for debug-kernel
* Tue May 16 2023 Coiby <coxu@redhat.com> - 2.0.26-4
  - kdumpctl: Add support for systemd-boot paths
  - mkdumprd: add --aggressive-strip as default dracut args
  - kdumpctl: Add basic UKI support
  - kdumpctl: Move temp file in get_kernel_size to global temp dir
  - kdumpctl: Move get_kernel_size to kdumpctl
  - kdumpctl: fix is_dracut_mod_omitted
  - kdump-lib: move is_dracut_mod_omitted to kdumpctl
  - kdump-lib: remove get_nmcli_connection_apath_by_ifname
  - kdump-lib: remove get_nmcli_field_by_conpath
  - dracut-module-setup: remove dead source_ifcfg_file
  - kdump-lib-initramfs: remove is_fs_dump_target
  - kdump-lib-initramfs: harden is_mounted
  - Show how much time kdump has waited for the network to be ready
  - Tell nmcli to not escape colon when getting the path of connection profile
  - kdumpctl: lower the log level in reset_crashkernel_for_installed_kernel
  - Install nfsv4-related drivers when users specify nfs dumping via dracut_args
  - sysconfig: add zfcp.allow_lun_scan to KDUMP_COMMANDLINE_REMOVE on s390
  - Use the correct command to get architecture
* Mon Jan 30 2023 Coiby <coxu@redhat.com> - 2.0.26-3
  - kdumpctl: make do_estimate more robust
  - kdumpctl: refractor check_rebuild
  - kdumpctl: cleanup 'stop'
  - kdumpctl: cleanup 'start'
  - kdump-lib: fix prepare_cmdline
  - kdumpctl: move aws workaround to kdump-lib
  - unit tests: add tests for prepare_cmdline
  - kdump-lib: always specify version in is_squash_available
  - mkfadumprd: drop unset globals from debug output
  - kdumpctl: merge check_current_{kdump,fadump}_status
  - dracut-early-kdump: explicitly use bash
  - dracut-early-kdump: fix shellcheck findings
  - kdumpctl: simplify check_failure_action_config
  - makedumpfile: Fix wrong exclusion of slab pages on Linux 6.2-rc1
* Thu Jan 19 2023 Fedora Release Engineering <releng@fedoraproject.org> - 2.0.26-2
  - Rebuilt for https://fedoraproject.org/wiki/Fedora_38_Mass_Rebuild
* Thu Dec 22 2022 Coiby <coxu@redhat.com> - 2.0.26-1
  - Update kexec-tools to 2.0.25
  - Don't try to update crashkernel when bootloader is not installed
  - dracut-module-setup.sh: also install the driver of physical NIC for Hyper-V VM with accelerated networking
  - dracut-module-setup.sh: skip installing driver for the loopback interface
* Wed Dec 07 2022 Coiby <coxu@redhat.com> - 2.0.25-4
  - dracut-module-setup.sh: stop overwriting dracut's trap handler
  - fadump: avoid status check while starting in fadump mode
  - fadump: add a kernel install hook to clean up fadump initramfs
  - fadump: fix default initrd backup and restore logic
  - fadump: use 'zstd' as the default compression method
* Fri Nov 25 2022 Coiby <coxu@redhat.com> - 2.0.25-3
  - kdumpctl: Optimize _find_kernel_path_by_release regex string
  - unit tests: adapt check_config to gen-kdump-conf.sh
  - kdump.conf: use a simple generator script to maintain
  - Don't run kdump_check_setup_iscsi in a subshell in order to collect needed network interfaces
  - Simplify setup_znet by copying connection profile to initrd
  - Wait for the network to be truly ready before dumping vmcore
  - Address the cases where a NIC has a different name in kdump kernel
  - Reduce kdump memory consumption by only installing needed NIC drivers
  - Reduce kdump memory consumption by not letting NetworkManager manage unneeded network interfaces
  - Set up kdump network by directly copying NM connection profile to initrd
  - Stop dracut 35network-manager from running nm-initrd-generator
  - Apply the timeout configuration of nm-initrd-generator
  - Determine whether IPv4 or IPv6 is needed
  - Add functions to copy NetworkManage connection profiles to the initramfs
  - Fix error for vlan over team network interface
  - Skip reset_crashkernel_after_update during package install
  - Don't check fs modified when dump target is lvm2 thinp
  - tests: use .nmconnection to set up test network
  - fadump: preserve file modification time to help with hardlinking
  - fadump: do not use squash to reduce image size
  - selftest: Add lvm2 thin provision for kdump test
  - selftest: Only iterate the .sh files for test execution
  - Add dependency of dracut lvmthinpool-monitor module
  - lvm.conf should be check modified if lvm2 thinp enabled
  - Add lvm2 thin provision dump target checker

Files

/usr/lib/.build-id
/usr/lib/.build-id/47
/usr/lib/.build-id/47/d07f676bee9b02cff9baf06182d0fd91e25a2f
/usr/lib/.build-id/61
/usr/lib/.build-id/61/adf6c699280508ccf145003ddb59b27820895d
/usr/sbin/kexec
/usr/sbin/vmcore-dmesg
/usr/share/doc/kexec-tools
/usr/share/doc/kexec-tools/News
/usr/share/doc/kexec-tools/TODO
/usr/share/licenses/kexec-tools
/usr/share/licenses/kexec-tools/COPYING
/usr/share/man/man8/kexec.8.gz
/usr/share/man/man8/vmcore-dmesg.8.gz

Generated by rpm2html 1.8.1

Fabrice Bellet, Tue Oct 21 04:57:47 2025