Partycjonowanie

In this screen you can see the content of your hard drive(s) along with the DrakX partitioning proposals for where to install Mageia.

The options available from those shown below will vary according to the layout and content of your particular hard drive(s).

  • Użyj istniejących partycji

    Jeśli dostępna jest ta opcja, oznacza to że zostały znalezione partycje linuksowe i mogą być użyte do instalacji.

  • Wykorzystaj wolne miejsce

    Jeśli posiadasz nieużywane miejsce na dysku (niesformatowane), może być ono wykorzystane do instalacji Magei.

  • Wykorzystaj wolne miejsce na partycji Windows

    Jeśli masz niewykorzystane miejsce na partycji Windows, instalator zaproponuje, aby je wykorzystać.

    To może być użyteczne rozwiązanie, aby przygotować miejsce na instalację Magei, jest to jednak ryzykowna operacja więc powinieneś się upewnić że masz kopię zapasową ważnych plików!

    Zauważ, że ta metoda spowoduje zmniejszenie rozmiaru partycji Windows. Partycja musi być "czysta", co oznacza, że Windows musi być poprawnie zamknięty za ostatnim razem gdy był używany. Musi być także zdefragmentowany, choć to nie daje pewności że wszystkie pliki zostały przesunięte poza obszar dysku, który zostanie użyty. Dlatego też bardzo wskazane jest zrobienie kopii zapasowej ważnych plików.

    With this option, the installer displays the remaining Windows partition in light blue and the proposed Mageia partition in dark blue with their intended sizes just underneath. You have the option to modify these sizes by clicking and dragging the gap between both partitions. See the following screen-shot.

  • Wymaż i wykorzystaj cały dysk

    This option will allocate the entire drive for Mageia.

    Zauważ! WSZYSTKIE dane z wybranego dysku zostaną wymazane. Uważaj!

    Jeśli chcesz używać części tego dysku do czegoś innego, albo już masz na dysku dane, których nie chcesz stracić, nie używaj tej opcji.

  • Custom disk partitioning

    Ta opcja daje Ci całkowitą kontrolę nad sposobem przeprowadzenia instalacji.

Partition sizing:

If you are not using the Custom disk partitioning option, the installer will allocate the available space according to the following rules:

  • If the total available space is less than 50 GB, then only one partition is created. This will be the / (root) partition.

  • If the total available space is greater than 50 GB, then three partitions are created

    • 6/19 of the total available place is allocated to / with a maximum of 50 GB

    • 1/19 przestrzeni zostanie przydzielona jako swap, jednak maksimum wynosi 4 GB

    • the rest (at least 12/19) is allocated to /home.

That means that from 160 GB or greater available space, the installer will create three partitions: 50 GB for /, 4 GB for swap and the remainder for /home.

Notatka

If you are using a UEFI system, the ESP (EFI System Partition) will be automatically detected - or created if it does not exist yet, and mounted on /boot/EFI. The Custom disk partitioning option is the only one that allows to check it has been correctly done

Notatka

If you are using a Legacy (CSM or BIOS) system with a GPT disk, you need to create a BIOS boot partition if not already existing. It is a roughly 1 MiB partition with no mount point. Choose „Zaawansowany podział na partycje za pomocą DiskDrake” to be able to create it with the Installer like any other partition, just select BIOS boot partition as the filesystem type.

Ostrzeżenie

Some newer drives are now using 4096 byte logical sectors, instead of the previous standard of 512. Due to lack of available hardware, the partitioning tool used in the installer has not been tested with such a drive. Also some SSD devices now use an erase block size over 1 MB. If you have such a device we suggest that you partition the drive in advance, using an alternative partitioning tool like gparted, and to use the following settings:

Align to = MiB

Free space preceding (MiB) = 2

Also make sure all partitions are created using an even number of megabytes.


CC BY-SA 3.0
loading table of contents...