ViPEC-3.1.2b1-1 RPM for i686

From SourceForge / v / vi / vipec / OldFiles

ViPEC is a program that allows the user to analyze high frequency, linear,
electrical networks. Analysis is performed in the frequency domain, and the
results are presented to the user in the form of port parameters (S,Y or Z).
It can also be used to compute input and output impedance/admittance and
amplifier stability factors (Linvill & Stern). ViPEC supports various lumped
elements (capacitors, resistors etc.), as well as distributed elements like
transmission lines and coupled transmission lines.

Provides

• ViPEC

Requires

• rpmlib(PayloadFilesHavePrefix) > 4.0-1
• rpmlib(CompressedFileNames) < 3.0.4-1
• ld-linux.so.2
• libc.so.6
• libdl.so.2
• libfreetype.so.6
• libGLcore.so.1
• libGL.so.1
• libGLU.so.1
• libICE.so.6
• libjpeg.so.62
• liblcms.so.1
• libmng.so.1
• libm.so.6
• libpng.so.2 <=
• libqt.so.2 <
• libSM.so.6 <
• libstdc++-libc6.2-2.so.3
• libX11.so.6
• libXext.so.6
• libXft.so.1 <
• libXmu.so.6 <=
• libXrender.so.1 <
• libXt.so.6
• libz.so.1 <
• libc.so.6(GLIBC_2.0) >
• libc.so.6(GLIBC_2.1.3)
• libm.so.6(GLIBC_2.0) >=

License

GPL

Changelog

* Wed Jul 11 2001 Johan Rossouw <johan.rossouw@alcatel.com.au>
  - initial build

Files

/opt/vipec
/opt/vipec/CHANGES
/opt/vipec/COPYING
/opt/vipec/COPYRIGHT
/opt/vipec/INTERNATIONALIZATION
/opt/vipec/LICENSE
/opt/vipec/README
/opt/vipec/ckt
/opt/vipec/ckt/amplifier.ckt
/opt/vipec/ckt/bandpass.ckt
/opt/vipec/ckt/bandpass.s2p
/opt/vipec/ckt/bandpass2.ckt
/opt/vipec/ckt/combined.ckt
/opt/vipec/ckt/coupled_line_filter.ckt
/opt/vipec/ckt/coupler.ckt
/opt/vipec/ckt/datafile.ckt
/opt/vipec/ckt/highpass.ckt
/opt/vipec/ckt/nec70000.s2p
/opt/vipec/ckt/stripline.ckt
/opt/vipec/ckt/test.ckt
/opt/vipec/help
/opt/vipec/help/analysing.html
/opt/vipec/help/components.html
/opt/vipec/help/disclaimer.html
/opt/vipec/help/frequency.html
/opt/vipec/help/index.html
/opt/vipec/help/license.html
/opt/vipec/help/models
/opt/vipec/help/models/block.html
/opt/vipec/help/models/block.png
/opt/vipec/help/models/capacitor.html
/opt/vipec/help/models/capacitor.png
/opt/vipec/help/models/coupled.png
/opt/vipec/help/models/gyrator.html
/opt/vipec/help/models/gyrator.png
/opt/vipec/help/models/idealcoupled.html
/opt/vipec/help/models/inductor.html
/opt/vipec/help/models/inductor.png
/opt/vipec/help/models/inductorq.html
/opt/vipec/help/models/inductorq.png
/opt/vipec/help/models/port.html
/opt/vipec/help/models/port.png
/opt/vipec/help/models/resistor.html
/opt/vipec/help/models/resistor.png
/opt/vipec/help/models/tlin2port.html
/opt/vipec/help/models/tlin2port.png
/opt/vipec/help/models/tlin4port.html
/opt/vipec/help/models/tlin4port.png
/opt/vipec/help/models/tlinphysical.html
/opt/vipec/help/models/tlinphysical.png
/opt/vipec/help/models/vccs.html
/opt/vipec/help/models/vccs.png
/opt/vipec/help/navigation.html
/opt/vipec/help/outputs.html
/opt/vipec/help/placing.html
/opt/vipec/help/schematics.html
/opt/vipec/help/substrates.html
/opt/vipec/help/units.html
/opt/vipec/help/variables.html
/opt/vipec/help/what_is.html
/opt/vipec/messages
/opt/vipec/messages/vipec_fr.qm
/opt/vipec/messages/vipec_fr.ts
/opt/vipec/messages/vipec_pt.qm
/opt/vipec/messages/vipec_pt.ts
/opt/vipec/vipec

Generated by rpm2html 1.8.1

Fabrice Bellet, Fri May 24 23:05:26 2013