Index index by Group index by Distribution index by Vendor index by creation date index by Name Mirrors Help Search

smartmontools-7.2-3.1 RPM for s390x

From OpenSuSE Ports Tumbleweed for s390x

Name: smartmontools Distribution: openSUSE:Factory:zSystems
Version: 7.2 Vendor: obs://build.opensuse.org/openSUSE:Factory:zSystems
Release: 3.1 Build date: Fri Aug 27 22:19:54 2021
Group: Hardware/Other Build host: s390zl28
Size: 2198705 Source RPM: smartmontools-7.2-3.1.src.rpm
Url: https://www.smartmontools.org/
Summary: Monitor for SMART devices
SMARTmontools controls and monitors storage devices using the
Self-Monitoring, Analysis, and Reporting Technology System (S.M.A.R.T.)
built into ATA, SATA and SCSI Hard Drives. This is used to check the
hard drive reliability and to predict drive failures. The suite
contains two utilities. The first, smartctl, is a command line utility
designed to perform simple S.M.A.R.T. tasks. The second, smartd, is a
daemon that periodically monitors the smart status and reports errors
to syslog. The package is compatible with the ATA/ATAPI-3 to -7
specification. The package is intended to incorporate as much "vendor
specific" and "reserved" information as possible about disk drives. The
commands man smartctl and man smartd will provide more information.

Provides

Requires

License

GPL-2.0-or-later

Changelog

* Tue Aug 24 2021 Stanislav Brabec <sbrabec@suse.com>
  - smartmontools-drivedb_h-update.sh: Fix update needed logic.
  - Add smartmontools-drivedb.h, the latest version from the upstream
    branch RELEASE_7_2_DRIVEDB.
* Wed Jan 06 2021 Dirk Müller <dmueller@suse.com>
  - update to 7.2:
    - smartctl: New option '--json=y[c]' selects YAML output.
    - smartctl '-i': Prints ATA TRIM and Zoned Device capabilities.
    - smartctl '-j': Fixed 'scsi_grown_defect_list' value.
    - smartctl '-a': Prints SCSI 'Accumulated power on time'.
    - smartctl '-n POWERMODE': SCSI support.
    - smartctl '-s standby,now' and '-s standby,off': SCSI support.
    - smartctl '-c': NVMe 1.4 additions.
    - smartd: Support for staggered self-tests.
    - smartd: No longer writes attribute log if no attributes were read
      due to standby mode or other error.
    - smartd: Now resolves symlinks before device names are checked for
      duplicates.
    - smartd: Fixed SMARTD_DEVICETYPE environment variable if DEVICESCAN is
      used without '-d TYPE'.
    - ATA: Device type '-d jmb39x-q,N' for JMB39x protocol variant used by
      some QNAP NAS devices.
    - ATA: Device type '-d jms56x,N' for JMS562 USB to SATA RAID bridges.
    - SCSI: Improved heuristics for log subpages of new and very old disks.
    - NVMe: Log transfer size limited to avoid device or kernel crashes.
    - NVMEe/USB: Device type '-d sntrealtek' for Realtek RTL9210 USB to
      NVMe bridges.
    - update-smart-drivedb: New option '--branch X.Y'.
    - HDD, SSD and USB additions to drive database.
    - Dropped support for pre-C99 snprintf().
    - configure: Dropped option '--without-working-snprintf'.
    - configure: Fixed '-fstack-protector*' detection.
    - Linux: Various fixes of smartd.service file (bsc#1183699).
    - Darwin: NVMe log support.
    - FreeBSD: Device scan does no longer include T_ENCLOSURE devices.
    - NetBSD: Fixed timeout handling.
    - NetBSD big endian: Fixed ATA register handling.
    - OpenBSD: Fixed timeout handling.
    - Windows: Dropped backward compatibility fixes for very old compilers.
  - drop smartd-service-novm.patch (upstream)
  - drop smartmontools-smartd-service.patch
    (SLE+Leap, now in upstream, bsc#1183699)
* Sat Jan 04 2020 Stanislav Brabec <sbrabec@suse.com>
  - Update to version 7.1:
    * smartctl: Fixed bogus exception on unknown form factor value.
    * smartctl '--json=cg': Suppresses extra spaces also in 'g'
      format.
    * smartctl '-i': ATA ACS-4 and ACS-5 enhancements.
    * smartd: No longer truncates very long device names in warning
      emails.
    * smartd: No longer skips scheduled tests if system clock has
      been adjusted to the past.
    * smartd '-A': Attribute logs now use local time instead of UTC.
    * ATA: Device type '-d jmb39x,N' for drives behind JMicron JMB39x
      RAID port multipliers.
    * SCSI: Workaround for incomplete Log subpages response from some
      SAS SSDs.
    * HDD, SSD and USB additions to drive database.
    * Autodetection of '-d sntjmicron' type for JMicron USB to NVMe
      bridges.
    * Fixed segfault on CCISS transfer sizes > 512 bytes.
    * Fixed smartd.service 'Type' if libsystemd-dev is not available.
    * Fixed '/dev/megaraid_sas_ioctl_node' fd leak.
    * Fixed GPL licensing problem of 'linux_nvme_ioctl.h'
      (smartmontools#1226,
      drop smartmontools-nvme_ioctl_h-license.patch).
  - Update smartmontools.keyring. Developers use new key.
  - smartmontools-drivedb_h-update.sh: Recognize equal files in
    different commits.
  - Drop smartmontools-nvme_ioctl_h-license.patch (SLE+Leap,
    now in upstream, https://www.smartmontools.org/ticket/1226)
  - Remove smartmontools-drivedb.h. No update available in the
    upstream branch RELEASE_7_0_DRIVEDB.
* Thu Dec 19 2019 Dominique Leuenberger <dimstar@opensuse.org>
  - BuildRequire pkgconfig(libsystemd) instead of systemd-devel:
    Allow OBS to shortcut through the -mini flavors.
* Tue Aug 06 2019 sbrabec@suse.com
  - Fix license of nvme_ioctl.h
    (https://www.smartmontools.org/ticket/1226,
    smartmontools-nvme_ioctl_h-license.patch).
* Tue Jun 04 2019 rw@suse.com
  - Update to 7.0 version
    - smartctl
    * New options '-j' and '--json[=giosu]' to enable experimental
      JSON output mode.  Also supports an alternative flat format
      suitable for grep ('--json=g').
    * '-l devstat': Fix for logs with 256 sectors.
    * '-l error': Prints SCSI Pending Defects log page if supported.
    * '-H': Prints SCSI Format Status log page if supported.
    * '-x': Now includes '-l defects'.
    * New option '-d scsi+TYPE' to disable SAT auto detection for
      'aacraid' and 'cciss'.
    - NVMe/USB: Device type '-d sntjmicron' for NVMe drives behind
      JMicron USB to NVMe bridges.
    - NVMe: SMART/Health Information and Error Information are always
      read with broadcast NSID.
    - SCSI: Various improvements for the decoding of log pages.
    - SCSI: Improved handling of READ CAPACITY command.
    - SCSI: Support for SAS host managed drives.
    - update-smart-drivedb: New option '-u github'.
    - update-smart-drivedb: New signing key.
    - HDD, SSD and USB additions to drive database.
    - Always use '-d sat' for USB vendor IDs with known SAT support.
    - Linux
    * Device scan with '-d by-id' scans '/dev/disk/by-id/*' symlinks.
    * Dropped device scan support for devfs.
    * Fixed device scan with multiple '-d TYPE' options.
    * Fixed device scan crash on missing '/proc/devices'.
    * USB ID detection also for '/dev/sgN'.
    * smartd: Could now run as systemd service with 'Type=notify' set.
  - Drop upstreamed patches:
    * smartmontools-scsiata-scsi_only.patch
    * smartmontools-systemd-no-syslog.patch
  - Update smartmontools-drivedb.h to the latest version from the
    upstream branch RELEASE_7_0_DRIVEDB.
* Tue Sep 25 2018 sbrabec@suse.com
  - Fix smartd.service EnvironmentFile (boo#1095662).
* Fri Jun 22 2018 kukuk@suse.de
  - Add smartd_generate_opts.path and smartd_generate_opts.service
    to update smartd_opts if sysconfig is modified. Needed for
    [FATE#325524].
* Tue Apr 17 2018 sbrabec@suse.com
  - Fix SUSE default of S.M.A.R.T. checks: really enable nightly
    short tests (bsc#1073918).
* Thu Feb 08 2018 sbrabec@suse.com
  - Make possible to disable broken SAT support by -d scsi+cciss,N
    (bsc#1038271, smartmontools-scsiata-scsi_only.patch,
    https://www.smartmontools.org/ticket/871).
  - Update smartmontools.keyring.

Files

/etc/smart_drivedb.h
/etc/smartd.conf
/etc/smartd_warning.d
/etc/smartd_warning.sh
/usr/lib/smartmontools
/usr/lib/smartmontools/generate_smartd_opts
/usr/lib/systemd/system/smartd.service
/usr/lib/systemd/system/smartd_generate_opts.path
/usr/lib/systemd/system/smartd_generate_opts.service
/usr/sbin/rcsmartd
/usr/sbin/smartctl
/usr/sbin/smartd
/usr/sbin/update-smart-drivedb
/usr/share/doc/packages/smartmontools
/usr/share/doc/packages/smartmontools/AUTHORS
/usr/share/doc/packages/smartmontools/COPYING
/usr/share/doc/packages/smartmontools/ChangeLog
/usr/share/doc/packages/smartmontools/ChangeLog-6.0-7.0
/usr/share/doc/packages/smartmontools/NEWS
/usr/share/doc/packages/smartmontools/README
/usr/share/doc/packages/smartmontools/TODO
/usr/share/doc/packages/smartmontools/examplescripts
/usr/share/doc/packages/smartmontools/examplescripts/Example1
/usr/share/doc/packages/smartmontools/examplescripts/Example2
/usr/share/doc/packages/smartmontools/examplescripts/Example3
/usr/share/doc/packages/smartmontools/examplescripts/Example4
/usr/share/doc/packages/smartmontools/examplescripts/Example5
/usr/share/doc/packages/smartmontools/examplescripts/Example6
/usr/share/doc/packages/smartmontools/examplescripts/Example7
/usr/share/doc/packages/smartmontools/examplescripts/Example8
/usr/share/doc/packages/smartmontools/examplescripts/README
/usr/share/doc/packages/smartmontools/smartd.conf
/usr/share/fillup-templates/sysconfig.smartmontools
/usr/share/man/man5/smartd.conf.5.gz
/usr/share/man/man8/smartctl.8.gz
/usr/share/man/man8/smartd.8.gz
/usr/share/man/man8/update-smart-drivedb.8.gz
/usr/share/smartmontools
/usr/share/smartmontools/drivedb.h
/usr/share/smartmontools/drivedb.h.error
/usr/share/smartmontools/drivedb.h.lastcheck
/usr/share/smartmontools/drivedb.h.old
/var/lib/smartmontools
/var/lib/smartmontools/smartd_opts


Generated by rpm2html 1.8.1

Fabrice Bellet, Thu Nov 25 00:05:30 2021