Index index by Group index by Distribution index by Vendor index by creation date index by Name Mirrors Help Search

libmpath0-0.9.4+71+suse.c648a77-150500.1.2 RPM for s390x

From OpenSuSE Leap 15.5 for s390x

Name: libmpath0 Distribution: SUSE Linux Enterprise 15
Version: 0.9.4+71+suse.c648a77 Vendor: SUSE LLC <>
Release: 150500.1.2 Build date: Wed May 3 18:10:28 2023
Group: System/Libraries Build host: s390zp31
Size: 882098 Source RPM: multipath-tools-0.9.4+71+suse.c648a77-150500.1.2.src.rpm
Summary: Libraries for multipath-tools
libmpathpersist provides a C API for handling of SCSI persistent
reservations for device-mapper multipath devices. libmpathcmd
provides a C API for sending commands to a running multipathd




GPL-2.0-only AND LGPL-2.1-only AND LGPL-2.0-or-later


* Wed Mar 22 2023
  - Update to version 0.9.4+71+suse.c648a77:
    * libmultipath: avoid grouping paths wrongly with "find_multipaths smart"
    * fix multipath-tools build with liburcu 0.14.0
* Wed Jan 25 2023
  - Update to version 0.9.4+68+suse.98559ea:
    * libmultipath: bump ABI version to 18.0.0
    * libmultipath: pathinfo: don't fail for devices lacking INQUIRY properties
    * libmpathpersist: use conf->timeout for updating persistent reservations
    * libmultipath: is_path_valid(): check if device is in use
      (bsc#1203141) (added libmount dependency)
    * libmultipath: orphan paths if coalesce_paths frees newmp (bsc#1207546)
    * multipathd: handle no active paths in update_map_pr (bsc#1207546)
    * multipathd: make pr registration consistent (bsc#1207546)
    * libmultipath: don't leak memory on invalid strings  (bsc#1207546)
    * multipath.conf(5): improve documentation of dev_loss_tmo (bsc#1207546)
    * libmpathpersist: fix command keyword ordering (bsc#1207546, bsc#1209345)
    * libmultipath: fix 'show paths format' failure
    * minor bugfixes
    * hwtable fixes
    * Build system rework
    * spec file: adapt make command line to changes in build system
    * spec file: use make -Orecurse (better readable output)
    * spec file: use verbose build
* Wed Jan 18 2023
  - Fix "rpm --verify" (bsc#1207232)
* Wed Oct 26 2022
  - Update to version 0.9.2+59+suse.ac8942d:
    * Fix segfault in "multipath -t" command (boo#1204731)
* Mon Oct 24 2022
  - Update to version 0.9.2+57+suse.cf3c1e9:
    * Fix multipathd authorization bypass and symlink attack
      (bsc#1202739 CVE-2022-41973 CVE-2022-41974)
    * add multipath-dracut.conf: dracut config file to install
      tmpfiles.d/multipath.conf in initramfs
    * Use "queue_mode bio" for NVMeoF/TCP devices
    * Upstream bug fixes and hwtable updates
  - Drop recompress.service, it just slows down build
* Fri Sep 09 2022
  - Update to version 0.9.1+52+suse.be8809e:
    * Code-identical to 0.9.1+48+suse.9c6c435 (merge in git repo
      to preserve history; fix revision in _service file).
* Wed Sep 07 2022
  - Update to version 0.9.1+48+suse.9c6c435:
    * Upstream version update
    * kpartx_id: remove bashism
    * Doc: add multipathc.8 manual page
* Sat Sep 03 2022
  - Update to version 0.9.0+134+suse.dbf2e2d:
    * Add multipathc command under GPL3.0, and split off libmpathutil
    * Fix command completion in interactive mode (bsc#1201483)
    * multipathd: fix use-after-free in handle_path_wwid_change()
    * Improve startup time for very large multipath.conf (bsc#1200523)
    * Avoid checker blocking event handling for huge number of devices
    * Cleanup sysfs accessors in libmultipath
    * Minor upstream bug fixes
    * Spelling fixes
    * Documentation: add ALUA info to, delete README.alua
* Wed Aug 24 2022
  - Update to version 0.9.0+55+suse.33d8854:
    * Avoid linking to libreadline to avoid licensing issue
* Wed Jul 13 2022
  - Update to version 0.9.0+39+suse.51a2ab1:
    Upstream bug fixes:
    * libmultipath: fix find_multipaths_timeout for unknown hardware
    * multipath-tools: fix "multipath -ll" for Native NVME Multipath devices
* Wed Jul 13 2022
  - Update to version 0.9.0+33+suse.fdc6686
    * multipath.conf: add support for "protocol" subsection in
      "overrides" section to set certain config options by protocol.
    * Removed the previously deprecated options getuid_callout,
      config_dir, multipath_dir, pg_timeout
    * hwable fixes and additions
    * multipath.conf(5): add disclaimer about vendor support
    * libmultipath, kpartx: fix callers of dm_get_next_target()
    * Change built-in defaults for NVMe: group by prio, and immediate
    * Allow compilation with -D_FORTIFY_SOURCE=3
* Wed May 11 2022
  - Update to version 0.8.9+90+suse.71a70fb:
    * support overriding -D_FORTIFY_SOURCE in OPTFLAGS
    * add -U_FORTIFY_SOURCE to optflags to avoid compilation errors
      on old distros
* Tue May 10 2022
  - Update to version 0.8.9+87+suse.a1eb122:
    * add ability to autodetect support for -D_FORTIFY_SOURCE=3
* Mon May 09 2022
  - Update to version 0.8.9+85+suse.a9da21c:
    * This is a pre-release of multipath-tools 0.9.0
    * multipath.conf: add "protocol" subsection in "overrides" section
      This allows to set "dev_loss_tmo", "fast_io_fail_tmo", and
      "eh_deadline" on a per-protocol basis rather than per storage
    * multipath.conf: drop support for deprecated options:
      getuid_callout, pg_timeout, config_dir, multipath_dir
    * multipathd: don't switch to DAEMON_IDLE during startup
    (bsc#1199346, bsc#1197570)
    * multipathd: avoid delays during uevent processing (bsc#1199347)
    * Fixes for minor issues reported by coverity
    * Fix for memory leak with uid_attrs
    * Fix possibility to redefine -D_FORTIFY_SOURCE macro.
    * Updates for built in hardware db
* Thu Apr 14 2022
  - Update to version 0.8.9+42+suse.45974f11:
    * Logging improvements
    * Fix busy loop with delayed_reconfigure (bsc#1199342)
    * multipathd: use remove_map_callback for delayed reconfigure
    * multipathd: Don't keep starting TUR threads, if they always hang.
    * Fix handling of path addition in read-only arrays on NVMe
    * Updates of built-in hardware database
  - Update to upstream 0.8.9
    * libmultipath: only warn once about unsupported dev_loss_tmo
    * Otherwise code-identical to 0.8.8+64
* Mon Mar 28 2022
  - If multipath-tools is newly installed, load dm-multipath
* Wed Feb 16 2022
  - Update to version 0.8.8+64+suse.f265f7e0:
    * libmultipath: fix printing native nvme multipath topology
    * libmultipath: add %L path wildcard for 64-bit hex LUN
    * libmultipath: support host adapter name lookup for s390x ccw bus
* Tue Feb 15 2022
  - Update to version 0.8.8+60+suse.4c5922cb:
    * multipathd: add suppport for FC Fabric Performance Impact
      Notifications (FPIN) (bsc#1195506)
* Wed Feb 09 2022
  - Version 0.8.8+57+suse.dfb672fe
    * kpartx.rules: skip MD devices (bsc#1195644)
    * libmultipath: hwtable: use ALUA for all LIO targets (bsc#1195649)
    * multipathd.service: drop ExecStartPre for loading dm-multipath
* Wed Feb 02 2022
  - Version 0.8.8+45+suse.628d603e
    * fix handling of historical-service-time path selector (bsc#1195425)
    * fix marking multipath devices as failed prematurely on startup
    * multipathd.service: remove LimitCORE=infinity directive
      This should only be enabled for debugging.
    * multipathd.service: don't load scsi_dh modules (bsc#1195397)
      This is done via modules-load.d functionality on (open)SUSE
  - Upstream fixes:
    * Fix claiming of paths with "find_multipaths strict"
    * Avoid unnecessary read-only reloads
* Fri Jan 07 2022
  - Version 0.8.8+13+suse.79c3556f
    * code-wise identical to 0.8.8+38+suse.2bdd3a14
      (previous version number was too high by mistake)
* Mon Dec 06 2021
  - Update to 0.8.8+38+suse.2bdd3a14.obscpio
    * upstream version bump. Code-wise identical to 0.8.7+138+suse.7c9afe31
* Fri Dec 03 2021
  - Drop versioned dependency on libmpath0 again (bsc#1190622)
    * Since 0.8.6, libmultipath and libmpathpersist have got proper ABI
      versioning, and rpmbuild auto-generates dependencies on etc.
* Thu Dec 02 2021
  - Update to version 0.8.7+138+suse.7c9afe31:
    New upstream version (pre-0.8.8)
    * deprecate "config_dir" and "multipath_dir" config options
      (will be removed in future version)
    * remove dependency on systemd-udevd-settle.service (boo#1193336)
    * fix crash in remove_map (boo#1193334)
    * CLI: add path wildcard "%I" for init state
    * CLI: add "reconfigure all" command
    * allow multiple pending "reconfigure" commands (bsc#1189551)
    * speed up "reconfigure" by avoiding unnecessary map reloads
    * rework of CLI command handler (unix socket handler) to avoid
      hanging CLI commands (bsc#1189551)
    * fix multipathd startup after stop during reconfigure (boo#1193338)
    * improve error detection and warning messages in config file parser
    * fix exit status of multipath -T (bsc#1191900)
    * fix defects reported by coverity (boo#1193342)
    - avoid sleeping with locks held
    - exit if bindings file is broken
    - set umask before mkstemp
    - add bounds and consistency checks in SCSI VPD parsing code
    * add hardware table entry for DellEMC/ME4 (PowerVault ME4)
* Tue Sep 21 2021
  - Add a versioned dependency of multipath-tools on libmpath0
* Fri Sep 10 2021
  - Update to version  0.8.7+14+suse.5a09bfa1:
    * Fix possible string overflows (bsc#1188148)
  - Upstream fixes / changes
    * better string handling
    * multipath: print warning if multipathd isn't running
    * mpathpersist: better error msg when no usable paths exist
    * fixes from 0.8.6+32+suse.f11c192 merged upstream
* Fri Aug 13 2021
  - Spec file: remove compatibility code for SLE <= SLE15-SP2
* Thu Aug 12 2021
  - Update to version 0.8.6+32+suse.f11c192:
    * libmultipath:fix compilation with glibc 2.34 (bsc#1189099)
    * libmultipath: avoid buffer size warning with systemd 240+
    * libmultipath: use uint64_t for sg_id.lun (bsc#1187534)
  - Upstream bug fixes:
    * multipath-tools: make HUAWEI/XSG1 config work with alua and multibus
    * multipath-tools: add info about HPE Alletra 6000 and 9000
    * multipathd: cli_getprkey(): fix return value and "aptpl" support
    * multipathd: don't rescan_path on wwid change in uev_update_path
    * kpartx: Don't leak memory when getblock returns NULL
    * multipath: free vectors in configure
    * multipathd: fix ev_remove_path return code handling
    * multipathd: remove duplicate orphan_paths in flush_map
    * multipathd: don't fail to remove path once the map is removed
    * multipathd: fix compilation issue with liburcu < 0.8
* Tue Jun 08 2021
  - install to /usr on Tumbleweed (boo#1029961)
* Tue May 18 2021
  - Update to version 0.8.6+10+suse.47711374:
    * Github workflows: add CI for SUSE-specific branches
* Fri Apr 02 2021
  - Disabled LTO for multipath-tools
    * The test for is_valid_path fails if LTO is enabled, just
      disabling it for %check is insufficient.
* Thu Apr 01 2021
  - Update to version 0.8.6+9+suse.6c05a61:
    Update to upstream 0.8.6.
    * add eh_deadline option to avoid endless SCSI error handling
    * add wwid_recheck option to detect storage configuration changes
    * add library versioning for libmultipath, libmpathpersist etc. and
      to libmultipath plugins
    * move some global symbols to libmultipath (udev, logsink, etc)
      and provide default implementations for get_multipath_config() etc.
      This allows simplifiying libmpathpersist_example.c drastically.
    * fixes for shutdown issues and various race conditions on exit
    * improve cleanup on exit, fix memory leaks
    * add libmpathvalid library
    * fixes for SAS expanders (bsc#1178377, bsc#1178379, bsc#1177081)
    * Avoid access to root FS while queueing IO (bsc#1178049,
    * lots of bug fixes, additions to built-in hardware table, and
      CI improvements (bsc#1186212)
    * kpartx: free loop device after listing partitions (boo#1107187)
    Bug fixes on top of 0.8.5 mentioned below are also included in
    this upstream version.
* Thu Apr 01 2021
  - Update to version 0.8.5+30+suse.633836e:
    * multipathd: give up "add missing path" after multiple failures
* Thu Mar 18 2021
  - Update to version 0.8.5+29+suse.5dabcd2:
    * 11-dm-mpath.rules: run "multipath -U" with -v1 (bsc#1182871)
    * libmultipath: merge update_multipath_table() and update_multipath_status()
* Fri Mar 12 2021
  - Update to version 0.8.5+26+suse.2cbedfd:
    Avoid "illegal request" errors on non-RDAC storage
    (bsc#1182072, bsc#1177371)
* Wed Mar 10 2021
  - Update to version 0.8.5+23+suse.c11b054:
    * multipath -U: reduce log level of "adding new path" message
    (bsc#1181435, bsc#1183666)
* Wed Feb 10 2021
  - Update to version 0.8.5+22+suse.e1e3c48:
    * multipath-tools tests: fix stringop-overflow build errors with gcc 11
    * README moved to (has been converted to markdown upstream)
* Wed Dec 16 2020
  - Update to version 0.8.5+12+suse.3b0e9ca
    * libmultipath: force map reload if udev incomplete
    (bsc#1178662, bsc#1172157, bsc#1175454, bsc#1176406)
  - Fixes from upstream 0.8.5
    * multipath-tools: add MacroSAN arrays to hwtable
    * libmultipath: Allow discovery of USB devices
    (add configuration option "allow_usb_devices")
* Fri Dec 04 2020
  - Remove compatibility code for SLE <= 12-SP2 from spec file
* Thu Sep 17 2020
  - Bugref for all minor fixes since SLE15-SP2 release (bsc#1176670)
  - Added README.alua
* Wed Sep 16 2020
  - Update to version 0.8.4+192+suse.1bc10ad:
    * Fix handling of hardware properties for maps without paths
* Wed Sep 16 2020
  - Update to version 0.8.4+190+suse.fe234ea:
    * Fixes for daemon shutdown issues from  SLE(bsc#1110060, bsc#1110439)
    - multipathd: allow shutdown during configure()
    * fix compilation of external programs with -lmultipath
    (bsc#1133957, necessary after the above fix)
    * Minor upstream fixes
* Thu Sep 10 2020
  - Missing past changelog bug references:
    * 0.7.3+10+suse.70ccb55b0439:
    Patch series for NVMe discovery and failover (bsc#1038865,
    * 0.7.9+109+suse.203c1cf
    * setup_map: wait for pending path checkers to finish
* Thu Aug 27 2020
  - Update to version 0.8.4+183+suse.1817ce2:
    Added reviewed upstream fix for multipath crash
    * multipath: get_dm_mpvec: discard broken maps
* Wed Aug 26 2020
  - Update to version 0.8.4+180+suse.50a2698:
    * Fix memory access / leak issues found with valgrind
* Fri Aug 21 2020
  - Update to version 0.8.4+170+suse.801341f:
    * libmultipath: tests: fix bitfield tests
    * Spec file: disable LTO for %check (bsc#1133122)
* Thu Aug 20 2020
  - Update to version 0.8.4+167+suse.70bef90:
    Pull in reviewed upstream changes
  - Bug fixes
    * libmultipath: add consistency check for alias settings (bsc#1172429)
    * libmultipath: select_action(): don't drop map if alias clashes (bsc#1172429)
    * libmultipath: refuse reloading an existing map with different WWID
    * libmultipath: select_action(): force udev reload for uninitialized maps
    * multipathd: uev_trigger(): handle incomplete ADD events (bsc#1172157)
    * improve logging for failure to set dev_loss_tmo (bsc#1173060, bsc#1173064)
    * libmultipath: add device to hwtable.c (bsc#1174026) (ETERNUS AHB)
  - New features
    * multipath: add -D option to skip multipathd delegation
    * multipath: delegate flushing maps to multipathd
    * multipathd: add "del maps" multipathd command
  - Other changes
    * cleanup disassemble_map() code path (bsc#1178377, bsc#1178379)
    * multipath-tools: introduce INIT_REMOVED state
    * logging improvements
    * fix "multipathd show devices"
    * libmultipath: remove uevent listener failback
    * libmultipath: create bitfield abstraction
    * libmultipath: count pending paths as active on loads
    * kpartx: handle alternate bsd disklabel location
  - Lots of minor fixes and cleanups
  - Spec file: use %service_del_postun_without_restart macro
* Wed Jun 10 2020
  - Update to version 0.8.4+43+suse.908383f:
    * enable negated regular expression syntax in conf file
    * change default devnode blacklist to
* Mon Jun 08 2020
  - Update to version 0.8.4+40+suse.b06c2e5a:
  - Fix udev rule processing during coldplug (bsc#1172157)
    * 11-dm-mpath.rules: Fix udev rule processing during coldplug
  - Fix compilation with gcc-10
    * fix boolean value with json-c 0.14
    * libmultipath: fix condlog NULL argument in uevent_get_env_var
  - Reviewed upstream changes:
    * simplify failed_wwid code
    * centralize path validation code
  - Use pkgconfig for BuildRequires
* Tue May 12 2020
  - Update to version 0.8.4+31+suse.8f53764:
    * Fix sporadic build failures caused by missing build dependencies
* Mon May 11 2020
  - Update to version 0.8.4+29+suse.c27ed8d:
    * multipath-tools: set -Wno-error=clobbered
    * keep warning flags during rpm build
    * Eliminate compiler warnings on 32bit build.
    * Fixes for tests under i586
  - Spec file: add %check section to run multipath-tools CI
    * not on SLE12, as cmocka is missing
    * add build dependency on cmocka for building tests
    * run "make test" with parallel make
* Mon May 11 2020
  - Update to version 0.8.4+19+suse.48fc2f4:
    * multipath: add "-e" option to enable foreign libraries
    * libmultipath: set "enable_foreign" to NONE by default
    * deleted libmultipath-set-enable_foreign-to-NONE-by-default.patch
      (included in factory git repo now).
    * Makefile: dependency fixes for parallel build
  - Get rid of %is_opensuse:
    * drop build workaround for Leap 42.1
    * build libdmmp for everything except SLE12/Leap42 and older
  - Other spec file updates:
    * use %make_build to speed up build (possible with 0.8.4)
  - Migrated to .obscpio format.
* Fri May 08 2020
  - Update to version 0.8.4+16+suse.f319f7ea
  - Changed github workflow back from merge-based to rebase-based.
    This makes it much easier to assess differences between upstream
    and SUSE code.
    * Use TAG_OFFSET in _service, as this is now possible again.
  - Reviewed upstream patches added:
    * kpartx.rules: fix handling of synthetic uevents (bsc#1161923)
    * libmpathpersist: limit PRIN allocation length to 8192 bytes
  - Update upstream version to 0.8.4
    * drop nr_active field, always count active paths (bsc#1125043)
    * kpartx: fix detection of dasd partition tables on loop devices
    * directio path checker fixes
    * lots of fixes for compiler warnings, and cleanups
    * nvme: update to nvme-cli 1.9
* Wed Feb 12 2020
  - Update to version 0.8.3+11+suse.7dcdf2f:
    * libmultipath: fix files read from config_dir (bsc#1162896)
* Thu Jan 16 2020
  - Update to version 0.8.3+10+suse.86684b9:
    * libmultipath: fix compilation with -fno-common
* Fri Oct 04 2019
  - Update to version 0.8.3+9+suse.f6f2a52
  - Minor upstream improvements and bug fixes
    * libmultipath: EMC PowerMax NVMe device config
* Wed Sep 04 2019
  - Update to version 0.8.2+27+suse.3ff280b:
    * Added upstream patch to fix premature path reinstantiation
      with san_path_err_XX (boo#1149319)
* Thu Aug 29 2019
  - Update to version 0.8.2+26+suse.d884195:
  - Don't activate NVMe native multipath support by default
    * multipath.conf.5: document foreign library support
    * multipath.conf: add "enable_foreign" parameter (bsc#1139837)
    * Set default for "enable_foreign" to "NONE" (bsc#1139837)
      added libmultipath-set-enable_foreign-to-NONE-by-default.patch
  - Added reviewed upstream patches (marginal path patch set from Red Hat)
    * add "marginal_pathgroups" config option
    * deprecate "delay_wait_checks" and "delay_watch_checks"; they are
      now automatically mapped to eqivalent "san_path_err_..." settings.
* Tue Jul 16 2019
  - Update to version 0.8.2+11+suse.0f6a649:
    * kpartx: recognize DASD on loop devices again (bsc#1139775)
    * Bump version to 0.8.2 - most changes were already in SUSE tree
    * Man page improvements (bsc#1148767)
* Tue Jul 02 2019
  - Update to version 0.8.1+59+suse.f947184:
    * libmultipath: trigger uevents for partitions, too (bsc#1140146)
* Tue Jun 25 2019
  - Update to version 0.8.1+58+suse.2af8f92:
    * libmultipath: more cautious blacklisting by missing property
      (don't blacklist paths because of temporarily missing
      udev properties)
    * libmultipath: fix memory leak with "uid_attrs" config option
    * libmultipath: get_uid: straighten the fallback logic
  - Fix SCSI VPD 0x80/0x83 parsing
  - Fix compiler warnings introduced by gcc 9:
    * -Wstringop-overflow, -Wstringop-truncation,
    - Waddress-of-packed-member
* Tue Jun 25 2019
  - Update to version 0.8.1+28+suse.fea562a:
    * mpathpersist: optimize for setups with many LUNs (bsc#1134648)
    * mpathpersist: add option -f/--batch-file (bsc#1134648)
    * libmultipath: get_prio(): really don't reset prio for
      inaccessible paths (bsc#1118495)
  - Upstream bug fixes from dm-devel (bsc#1139369):
    * multipath: call store_pathinfo with DI_BLACKLIST
    * multipathd: fix REALLOC_REPLY with max length reply
    * libmultipath: make vector_foreach_slot_backwards work as expected
    * multipathd: fix client response for socket activation
    * various minor fixes (coverity)
* Tue Apr 30 2019
  - Disable kmod() style dependencies again (bsc#1119414)
    * For TW, dependencies will be autogenerated
    * For SLE, feature is currently rejected (jsc#SLE-3853)
  - Update to version 0.8.1+8+suse.8c11498:
    * Avoid deadlock situation during udev settle
    (bsc#1131789, bsc#1125145)
    - multipath -u: test socket connection in non-blocking mode
    * Fix priority handling for offline paths
  - Update to upstream 0.8.1 (bsc#1148767)
    * Avoid device IO in "multipath -u" (bsc#1125145)
    * multipathd: protect all access to running_state
    (bsc##1110060, bsc#1110439)
    * Improve handling of changed WWIDs and temporary failure
    to obtain WWID. Option "disable_changed_wwids" is now ignored.
    * Fixes for PATH_PENDING state handling (bsc#1125043)
    * libmultipath: hwtable: add Lenovo DE series (bsc#1125507)
* Sat Apr 13 2019
  - Trim %if..%endif guards that do not affect the build result.
  - Combine %service_* calls to reduce generated code.
  - Make use of %make_install.
* Tue Mar 19 2019
  - Re-enable kmod-style dependencies for multipath-tools package
  - Separate out libmpath0 (bsc#1119414)
  - Spec file improvements
    * Add Conflicts: for older multipath-tools to libmpath0
    * Move license files to the libmpath0 package, which contains the
      code with complex licensing. The executables are GPL-2.0 anyway.
    * Remove bogus dependency of -devel package on device-mapper
    * -devel package depends on libmpath0, not multipath-tools
    * Remove %dir %{_defaultlicensedir} for SLE12-SP3 and newer
      (John Vandenberg <>)
    * Remove unused /var/cache/multipath directory
    * Remove check for multipath maps in %pre and %post
    * Remove SLE11-specific multipathd service stop / start from
      %pre / %post
    * Remove obsolete tools from package description (bsc#1129827)
    * Add -n to %service_del_{pre,post}un for multipathd.socket
* Fri Mar 15 2019
  - Update to version 0.8.0+17+suse.a28893f:
    * Code-identical to 0.7.9+139+suse.ed9d450, except for new
      version number
  - Disable kmod() style dependencies for now, as they are causing
    problems with image builds (bsc#1119414). They'd been active
    for SLE15-SP1 only, anyway.
  - _service: determine "tag offset" manually, the patch count
    determined by git is far too high.
* Thu Mar 07 2019
  - Fix module name in multipath.conf (bsc#1119414)
    * The modules-load.d entry must match the filename exactly
* Thu Mar 07 2019
  - Update to version 0.7.9+139+suse.ed9d450:
    * multipath-tools: Build: properly parse systemd's version
* Tue Mar 05 2019
  - Add kmod(xyz) style dependencies for SLE15-SP1
    (jsc#SLE-3853, fate#326579, bsc#1119414)
* Tue Mar 05 2019
  - Update to version 0.7.9+138+suse.0edd0a2:
  - Include reviewed fixes from upstream
    * libmutipath: continue to use old state on PATH_PENDING
    * libmultipath: disable user_friendly_names for NetApp
    * multipath: blacklist zram devices
    * various fixes for martinal path code
  - Bug fixes:
    * multipathd: Fix miscounting active paths (bsc#1125043)
    * multipathd: avoid null pointer dereference in LOG_MSG
    * minor fixes suggested by coverity (bsc#1127879)
* Fri Jan 11 2019
  - Add BuildRequires on suse-module-tools
    * we need it for regenerate_initrd_posttrans
* Wed Jan 09 2019
  - Update to version 0.7.9+111+suse.b4232b7:
  - merged upstream cb4a979a (SUSE bug fixes merged upstream,
    code-identical to previous release).
* Tue Jan 08 2019
  - Update to version 0.7.9+109+suse.203c1cf:
    * multipathd: avoid crash in cli_list_path (bsc#1121134)
    * libmultipath: fix compilation with older kernel headers
  - merged upstream fb824725
    * Improved NVMe support in both native and dm-mpath mode
    added basic NVMe ANA support (bsc#1119898, bsc#1118495)
    * Fix prio output in "multipathd show topology" (bsc#1119897)
    * multipathd: fix daemon not really shutdown
    (bsc##1110060, bsc#1110439)
* Fri Dec 14 2018
  - Update to version 0.7.9+90+suse.f81e290:
    * libmultipath: Increase SERIAL_SIZE to 128 bytes
* Wed Dec 12 2018
  - Update to version 0.7.9+89+suse.df77b66:
  - re-enable "san_path_err_xy" options
    These have been removed upstream, but they were supported
    in SLE-15/Leap15.0, so we can't simply throw them away.
    Improve documentation, mark them as deprecated, but keep
    the code in place.
* Wed Dec 12 2018
  - Update to version 0.7.9+85+suse.766b95e:
    * upstream patch series to make verbosity level 3
      less verbose and thus better usable (bsc#1118937)
    * fix for handling device size mismatch in coalesce_paths()
    * libmultipath: fix false removes in dmevents polling code
    * Spec file: remove build dependency on dracut which causes
      build errors for some distributions
* Mon Nov 26 2018
  - Update to version 0.7.9+58+suse.0790830:
    * libmpathpersist: fix off-by-one error in PRIN length check
    * multipathd: fix mpp->hwe handling when paths are freed
    (fix possible crash caused by new hardware table code)
* Wed Nov 14 2018
  - Update to version 0.7.9+55+suse.9fc8439:
    (note the "55" is due to former merge operations. We actually
    only have 7 patches on top of upstream. All other patches
    referenced below as "not upstream" have been merged).
    * Bump version to 0.7.9
    * multipathd: reset delay_wait_checks counter on failure
    * multipathd: fix irritating "minor number mismatch" message
    * fix possible failure to shut down (bsc#1110060, bsc#1110439)
    * upstream "checker overhaul" - cleanups and improvements for
    path checkers
    * Upstream fixes for failures handling path initializiation
    * various small upstream bug fixes.
* Wed Oct 03 2018
  - Update to version 0.7.7+136+suse.19bb285:
    Bug fixes from upstream, and SUSE bug fixes
    * multipathd: try SCSI persistent reservations for SCSI only
    * libmultipath: allow sysfs_pathinfo to return SKIPPED (bsc#1098458)
    * libmultipath: Fixup updating paths (bsc#1110418)
    * multipathd: fix memory leak on error in configure (bsc#1110418)
    * multipathd: minor fixes (bsc#1110418)
    * multipathd: function return value tweaks (bsc#1110418)
    * multipath: fix max array size in print_cmd_valid (bsc#1110418)
    * libmutipath: don't use malformed uevents (bsc#1110418)
    * libmultipath: fix null dereference int alloc_path_group (bsc#1110418)
    * libmultipath: fix memory issue in path_latency prio (bsc#1110418)
    * libmultipath: fix length issues in get_vpd_sgio (bsc#1110418)
    * multipathd: decrease log level of uevent messages (bsc#1110586)
    * multipathd: fix version check for DM_DEV_ARM_POLL ioctl (bsc#1110587)
    * libmultipath: pathinfo: skip hidden devices (bsc#1110586)
    * libmultipath: nvme: shorter topology output (bsc#1082419)
    * libmultipath: nvme: fix path detection for kernel 4.16 (bsc#1091112)
    * libmultipath: fix gcc 8.1 "truncated output" warnings (bsc#1099007)
    * (lib)mpathpersist: use O_RDONLY file descriptors (bsc#1093220)
    * libmpathpersist: fix byte swapping for big endian systems (bsc#1099036)
    * multipath-tools/tests: add tests for get_unaligned_beXX (bsc#1099036)
    * libmultipath: add (get|put)_unaligned_be64 (bsc#1099036)
    * libmpathpersist: fix stack overflow in mpath_format_readfullstatus()
    * libmpathpersist: fix typo in mpath_format_readfullstatus (bsc#1099007)
    * libmpathpersist: remove duplicate test in readfullstatus (bsc#1099007)
  - Update to upstream 1a8625abd (0.7.7+82)
    * minor fixes for kpartx, found by coverity
    * mpathpersist: add --param-alltgpt option
    * libmultipath: add "protocol" blacklist option.
    * multipathd: add new wildcard "%P" for "protocol"
    * multipath-tools: fix products names in hwtable
    * libmultipath: more debug output in alua prioritizer (bsc#1080965)
    * libmultipath: alua: retry RTPG for NOT_READY and UNIT_ATTENTION
    * libmultipath: alua_rtpg: use condlog for error messages (bsc#1080965)
* Mon Jul 02 2018
  - Update to version 0.7.7+75+suse.6287aef:
    Added minor updates from upstream
    * multipath-tools: add info about how to enable ALUA in ONTAP
    * multipath-tools: add directio path_checker for DASD devices
    * multipath-tools: make Product Name mandatory and add all of them
    Minor rebase, as some SUSE patches have been merged upstream
    (all mentioned in previous changelogs)
* Fri Jun 29 2018
  - Update to version 0.7.7+72+suse.4b24466:
    * multipath: fix return code handling in delegate_to_multipathd
    * multipath: don't start multipathd unnecessarily (bsc#1098177)
* Mon Jun 25 2018
  - Update to version 0.7.7+70+suse.4a5941e:
    * libmultipath: change partition_delimiter default to "-part"
    (bsc#1073622, bsc#1056526)
    * change default for find_multipaths to "greedy" (bsc#1099054)
    * libmultipath: allow distributions to change partition_delim default
    (bsc#1073622, bsc#1056526)
* Mon Jun 25 2018
  - Update to version 0.7.7+67+suse.a7d1e14:
  - RBD/RADOS backend support has been removed upstream
    remove support for it in SUSE, too (boo#1099037, FATE#826853)
    * added Obsoletes: for multipath-tools-rbd.
  - libdmmp version has changed to 0.2.0
  - New patches not yet upstream:
    (Wed Jun 12 2018: these are now upstream, since 0.7.8)
    * multipathd: fix mpp->hwe handling on path removal (boo#1099028)
    * libmultipath: print correct default for delay_*_checks
    (boo#1099026, bsc#1110418)
    * libmultipath: avoid error messages from RDAC check
    (bsc#1108728, bsc#1075539)
    * (lib)mpathpersist: use O_RDONLY file descriptors (bsc#1093220)
    * libmpathpersist: fix byte swapping for big endian systems (bsc#1099036)
    * multipath-tools/tests: add tests for get_unaligned_beXX (bsc#1099036)
    * libmultipath: add (get|put)_unaligned_be64 (bsc#1099036)
    * libmpathpersist: fix stack overflow in mpath_format_readfullstatus()
    * multipathd: fix buffer size in cli_getprkey (bsc#1099028)
    * libmultipath: fix gcc 8.1 "truncated output" warnings
    * libmpathpersist: fix typo in mpath_format_readfullstatus
    * libmpathpersist: remove duplicate test in readfullstatus
  - SUSE specific patches preserved:
    * multipath.rules: temporary rule to obtain ID_WWN for NVMe (bsc#1076828)
    * kpartx: create symlinks for dmraid devices (bsc#1064212)
    * multipath.conf.5: document no_partitons compat support (fate#323406)
    * libmultipath: compat support for 'features "1 no_partitions"' (fate#323406)
    * Added fossology assessment as README.licenses (bsc#1088801)
  - Dropped patches from previous factory/SLE15 release (0.7.3+69+suse.218a0d0):
    * libmultipath: don't [un]set queue_if_no_path after domap
    obsoleted by "libmultipath: cleanup features handling code"
    * multipath.rules: use -i flag to multipath
    obsoleted by path detection patch series
    * libmpathpersist: add support for prkeys file v3
    obsoleted by "mpathpersist: Fix invalid condition check"
    * libmultipath: fix deadlock in tur.c
    obsoleted by "libmultipath: fix tur checker locking"
    * checkers/rbd: missing pthread_lock() on failure path
    obsolete because of RBD removal
    * libmultipath/hwtable: don't hard-code ALUA for IBM IPR
    obsoleted by "libmultipath: hwhandler auto-detection for ALUA" and
    "libmultipath: don't reject maps with undefined prio"
    (bsc#1085212, bsc#1075129)
  - Update to upstream version 0.7.7+50 (39ad8dc8)
  - rework of "find_multipaths" logic
    * find_multipaths can now be "strict", "yes", "no", "greedy", or "smart"
    * SUSE default is "greedy" for now, consistent with previous behavior
    * "multipath -u -i" not necessary in udev rules any more
    (removed SUSE patch "multipath.rules: use -i flag to multipath")
  - patch series for config file handling (bsc#1067789):
    * fix inconsistent handling of multiple config file entries
      matching the same device (bsc#1067789)
    * multipath: implement "multipath -T" (bsc#1067789)
    * multipathd: implement "show config local" (bsc#1067789)
    * libmultipath: merge "multipath" config sections by wwid
    * multipathd: add path format wildcard "%0" for failures
    * libmultipath: config parser: Allow '"' in strings
  - multipath-tools: foreign/NVME implementation (bsc#1082419) for
    native NVME multipath configurations
  - Other new upstream features:
    * mpathpersist: add all_tg_pt option
    * add polling dmevent handler (only one thread waiting for device-mapper
    events rather than one per map).
    * multipath: add "ghost_delay" parameter
    * "marginal path" path state checking for better handling of
      unstable "shaky" connections in a SAN.
      conf options "marginal_path_err_rate_threshold" etc, see man page.
      This replaces the previous "san_path_err_threshold" functionality.
  - Upstream bug fixes:
    * Man page corrections and improvements for multipath.conf(5)
    * libmultipath: fix memory leak in process_config_dir() (bsc#1110352)
    * multipath: don't check timestamps without a path
    * multipathd: handle errors in uxlsnr as fatal (bsc#1086025)
    * libmultipath: don't reject maps with undefined prio (bsc#1085212,
    * multipathd: fix reservation_key check (bsc#1099008)
    * 11-dm-mpath.rules: dont't run "multipath -U" during coldplug
    * libmultipath: hwhandler auto-detection for ALUA
    (bsc#1085212, bsc#1075129)
    * multipath: fix rcu thread cancellation hang (bsc#1110418)
    * multipathd: register threads that use rcu calls (bsc#1110418)
    * multipathd: fix waiter thread cancelling
    * multipathd: use nanosleep for strict timing (avoids possible
    races with SIGALRM)
    * logging fixes:
    * libmultipath: fix log_pthread processing
    * libmultipath: set dm_conf_verbosity
    * libmultipath: fix basenamecpy
    * libmultipath: uev_update_path: update path properties
    * libmultipath: uev_update_path: always warn if WWID changed
    * libmultipath: get_uid: don't quit prematurely without udev
    * libmultipath: get_uid: check VPD pages for SCSI only (bsc#1108728)
    * libmultipath: fix wrong output of "multipath -t"
    * Introduce the libmultipath/unaligned.h header file
    * libmultipath: Fix sgio_get_vpd() (bsc#1099484)
    * kpartx: Improve reliability of find_loop_by_file()
    * libmultipath, alloc_path_with_pathinfo(): Ensure that pp->wwid is '\0'-terminated
    * libmultipath: enable feature disable changed wwid by default
    * multipathd: add lock protection for cli_list_status
    * bug fixes for "marginal path checker"
    * multipathd: fix signal blocking logic (bsc#1110060, bsc#1110439,
    * multipath-tools: add INSPUR/MCS to hardware table
    * multipath-tools: add RDAC SUN/ArrayStorage to hwtable
    * multipath-tools: remove DF arrays from HP
    * multipath: print sysfs state in fast list mode (bsc#1110354)
    * multipathd: remove coalesce_paths from ev_add_map
    * multipath: fix DEF_TIMEOUT use
    * libmultipath: fix tur checker locking
    * multipath-tools: handle exit signal immediately (bsc#1086025)
    * multipathd: release uxsocket and resource when cancel thread
    * path latency prioritizer fixes
    * multipathd.service: set TasksMax=infinity (bsc#1060616)
    * multipathd.service: drop Before=lvm2-lvmetad.service
    * multipathd.socket: add
    * kpartx.rules: fix by-id/scsi-* for user_friendly_names
    * multipath -C: decrease log level
    * libmultipath: hwtable: no_path_retry="queue" for NetApp NVMe
    * libmultipath: hwtable: multibus for NetApp NVMe-FC
    * libmultipath: select ALUA prioritizer for RDAC arrays only
    (bsc#1075539, bsc#1081241)
    * libmultipath: get_vpd_sgio: support VPD 0xc9  (bsc#1055949)
    * libmultipath: condlog: log to stderr (bsc#1055949)
    * multipath: delegate dangerous commands to multipathdd (bsc#1047639)
    * libmultipath: don't try to set hwhandler if it is retained
    * libmultipath: don't update path queueing on reload
    * multipathd: marginal path code fixes
    * multipath: check failed path dmstate in check_path
    * multipathd: clean up set_no_path_retry
    * multipathd: fix device creation issues
    * libmultipath: cleanup features handling code
    * multipath: fix hwhandler check in select_action
    * kpartx: don't delete partitions from partitions
    * limbultipath: prefer RDAC checker with detect_checker
    * multipath-tools: add AccelStor/NeoSapphire to hardware table
    * multipath-tools: add TMS/RamSan to hardware table
    * multipath-tools: add XIV/NEXTRA to hardware table
    * multipath-tools: add XIOtech/Magnitude to hardware table
    * libmultipath: ensure checker->fd == -1 if not set
* Thu Apr 12 2018
  - Update to version 0.7.3+69+suse.218a0d0:
    * multipath -ll: print foreign maps only with "-o" flag
    * Revert "disable nvme foreign library"
* Thu Apr 12 2018
  - Update to version 0.7.3+67+suse.8f0c27b:
    * disable nvme foreign library (bsc#1089353)
* Tue Apr 10 2018
  - No functional changes
  - Fixed rpmlint warnings (bsc#1088946)
    * multipath-tools-devel: moved .so files to /usr/lib[64]
    * added version dependencies for -devel packages
* Tue Apr 10 2018
  - No functional changes
    * fixed SPDX syntax (and -> AND)
    * added /usr/share/licenses
* Tue Apr 10 2018<
  - No functional changes, just licenses
  - Spec file: fix %license tags and info after closer inspection
    * kpartx is under GPL-2.0-only
    * rbd is under LGPL-2.1-only
  - Update to version 0.7.3+66+suse.dc5fe2d: Fix licensing info (bsc#1088801)
    * Added fossology assessment as README.licenses
    * multipath-tools: create LICENSES dir with the text of all used licences
* Fri Apr 06 2018
  - Update to version 0.7.3+61+suse.d4d0494:
    * 11-dm-mpath.rules: dont't run "multipath -U" during coldplug
* Wed Mar 28 2018
  - Fixed license tags in spec file
    * multipath tools / libmultipath is GPL-2.0-only
    * libmpathcmd is LGPL-2.0-or-later
    * libdmmp is GPL-3.0-or-later
    * adopt SPDX format.
* Wed Mar 28 2018
  - Update to version 0.7.3+60+suse.46ac839:
    * libmultipath/hwtable: don't hard-code ALUA for IBM IPR
    (bsc#1085212, bsc#1075129)
* Wed Mar 21 2018
  - Update to version 0.7.3+59+suse.1b6191c26774:
    * libmultipath: don't reject maps with undefined prio (bsc#1085212,
    * multipathd: handle errors in uxlsnr as fatal (bsc#1086025)
* Tue Mar 20 2018
  - Update to version 0.7.3+57+suse.bb6be4c8b4ca:
    * multipathd: fix signal blocking logic (bsc#1086025)
    * multipath-tools: handle exit signal immediately (bsc#1086025)
    * multipath: fix DEF_TIMEOUT use (bsc#1086014)
    * multipath-tools: foreign/NVME implementation v2 (upstream accepted)
* Mon Feb 26 2018
  - Update to version 0.7.3+53+suse.140f4937e9e7:
    * libmultipath: fix wrong output of "multipath -t" (bsc#1082835)
* Thu Feb 22 2018
  - Update to version 0.7.3+52+suse.08a969b7fce0:
  - Add limited support for displaying native NVMe multipath
    * libmultipath: foreign/nvme: implement path display
    * multipathd: use foreign API
    * multipath: use foreign API
    * libmultipath/foreign: nvme foreign library
    * libmultipath/print: add "%G - foreign" wildcard
    * libmultipath: API for foreign multipath handling
    * libmultipath: print: use generic API for get_x_layout()
    * libmultipath: print: convert API to generic data type
    * libmultipath: "generic multipath" interface
    * libmultipath: add vector_convert()
    * libmultipath: add vector_free_const()
    * libmultipath: get rid of selector "hack" in print.c
  - Fix locking errors detected by coverity check (bsc#1082418)
    * checkers/rbd: missing pthread_lock() on failure path
    * libmultipath: fix deadlock in tur.c
* Mon Feb 12 2018
  - Fix whitespace in dracut conf file (bsc#1080562)
* Tue Jan 30 2018
  - Update to version 0.7.3+38+suse.a16beed5280a:
    * kpartx: don't delete partitions from partitions (bsc#1078362)
    * hwtable: add latest updates (bsc#1078363)
    * multipathd.service: set TasksMax=infinity (bsc#1060616)
* Fri Jan 26 2018
  - Update to version 0.7.3+31+suse.6804bb73f72d:
    * libmultipath: hwtable: no_path_retry="queue" for NetApp NVMe
* Fri Jan 19 2018
  - Update to version 0.7.3+30+suse.6b5ed839:
    * multipath.rules: temporary rule to obtain ID_WWN for NVMe
    * libmultipath: ignore natively multipathed NVME devices
    * multipath.rules: handle NVME devices (bsc#1076828)
    * FIX "libmultipath: hwtable: multibus for NetApp NVMe-FC"
    * libmultipath: increase path product_id/rev field size for NVMe
* Tue Jan 16 2018
  - Update to version 0.7.3+25+suse.7c9920e2:
    * assemble_map: no newline at end of params string (bsc#1072253)
* Thu Jan 11 2018
  - Update to version 0.7.3+24+suse.703a61d5:
    * multipathd.service: drop Before=lvm2-lvmetad.service (bsc#1070427)
    * libmultipath: hwtable: multibus for NetApp NVMe-FC
    * libmultipath/propsel: select ALUA prioritizer for RDAC arrays only
    (bsc#1075539, bsc#1081241)
    * libmultipath: get_vpd_sgio: support VPD 0xc9 (bsc#1055949)
    * libmultipath: sgio_get_vpd: add page argument (bsc#1055949)
    * libmultipath: fix return code of sgio_get_vpd() (bsc#1055949)
* Fri Dec 22 2017
  - Update to version 0.7.3+19+suse.0fd18bdd:
    * multipathd.socket: add (bsc#1072253)
* Fri Dec 22 2017
  - Update to version 0.7.3+18+suse.8c97f433:
    * multipath -C: decrease log level (bsc#1072504)
* Fri Dec 22 2017
  - Update to version 0.7.3+17+suse.cac42e6f:
    * test-kpartx: add test for mapping without UUID
* Wed Nov 29 2017
  - Update to version 0.7.3+15+suse.570d5938:
    * kpartx.rules: fix by-id/scsi-* for user_friendly_names
* Mon Nov 20 2017
  - Update to version 0.7.3+14+suse.da06e7f3:
    * libmultipath: fix return code of sysfs_get_timeout (bsc#1069037)
* Mon Nov 06 2017
  - added sample code for libmpathpersist (bsc#1066376)
    * added libmpathpersist-example.c
  - multipath-tools.spec: package symlink in -devel
    package (bsc#1066376). We *do not* package header files for
    libmultipath, as the APIs are not public.
* Fri Nov 03 2017
  - multipath-tools.spec: package *.so symlinks in -devel pkgs
  - multipath-tools.spec: SLE15: add RADOS support for s390x
  - Fix build error for targets SLE_12, SLE_12_SP1
* Thu Oct 26 2017
  - Update to version 0.7.3+13+suse.db431514080f:
    * kpartx: create symlinks for dmraid devices (bsc#1064212)
    * limbultipath: prefer RDAC checker with detect_checker
* Tue Oct 17 2017
  - Update to version 0.7.3+11+suse.4de08d96:
    * libmultipath: condlog: log to stderr (bsc#1063059)
* Thu Sep 21 2017
  - Update to version 0.7.3+10+suse.70ccb55b0439:
  - Rebase to upstream release 0.7.3
    * libmultipath: add pthread_cleanup hook for udev monitor
    * libmultipath: pull functions into util.c
    * libmultipath: change reservation_key to a be64
    * libmpathpersist: fix update_prflag code
    * multipath: add alternate reservation_key method
    * mpathpersist: add support for prkeys file
    * multipath-tools: minor edition and corrections in multipath.conf.5
    * multipath-tools: fix incorrect length for strncmp in uevent.c
    * multipath-tools: clarify how to dump the multipathd config
    * multipath-tools: replace "setting: array" with "setting: storage device" at multipath output
    * libmultipath: sanitize fd handling
    * multipath-tools: link internal libraries before foreigns
    * multipath-tools: remove Sun StorEdge T4(6020,6120,6320) arrays from hwtable
    * multipath-tools: add support for all arrays from Sun StorEdge 3000 family
    * multipath-tools: add Xiotech iglu blaze arrays to hwtable
    * multipath-tools: add Dot Hill/Seagate arrays to hwtable
    * libmultipath: update INFINIDAT builtin config
    * multipath-tools: add info about adding new hardware
    * multipath-tools: Remove the limitation of IPC command reply length.
    * multipath-tools: libdmmp: Improve timeout mechanism
    * multipath-tools: libdmmp: New function to flush and reconfig
    * Bump version to 0.7.3
  - minor fixes for upstream 0.7.3
    * libmultipath: ensure checker->fd == -1 if not set
    * libmpathpersist: add support for prkeys file v3
    * multipath: add man page info for my prkey changes
  - Patch series for NVMe discovery and failover (bsc#1038865)
    * discovery: sanitize NVMe discovery
    * libmultipath/discovery: modify NVMe path states
    * Add 'none' checker
    * hwtable: set 'none' as default checker for NVMe
* Mon Sep 18 2017
  - Update to version 0.7.2+49+suse.993a29b1188d:
    * Revert "11-dm-mpath.rules: Remember DM_ACTIVATION" (boo#1059227)
    * Revert "11-dm-mpath.rules: don't set READY->ACTIVATION"
    * multipath: delegate using libmpathcmd (bsc#1047639)
* Mon Sep 18 2017
  - split off rados support into separate multipath-tools-rbd package.
    This avoids pulling in the whole rados/ibverbs/rdma stack with
    multipath-tools. (bsc#1058504).
  - multipath-tools-rbd is Recommended but not Required by multipath-tools.
* Sat Sep 02 2017
  - Update to version 0.7.2+44.3a8d750c:
    Misc bug fixes:
    * multipathd: don't flood system with sd_notify calls (bsc#1056011)
    * libmultipath: add_feature: skip pointless NULL check (bsc#1055635)
    * libmultipath: add_feature: allow only 1 feature (bsc#1055635)
    * multipath: delegate dangerous commands to multipathd (bsc#1047639)
    * libmultipath: fix partition_delimiter config option (bsc#1056526)
    * kpartx: helper functions for name and uuid generation (bsc#1056508)
    * kpartx: search partitions by UUID, and rename (bsc#1056508)
    * kpartx: fix a corner case when renaming partitions (bsc#1056508)
    * kpartx: -d must work with empty partition table (boo#1056599)
    * kpartx: only recognize dasd part table on DASD (boo#1056599)
    Rework of the udev rules related to multipath and kpartx (bsc#1054363):
    * libmultipath: support MPATH_UDEV_NO_PATHS_FLAG on map creation
    * libmultipath: add get_udev_device
    * libmultipath: get_refwwid: use get_udev_device
    * libmultipath: use const char* in some dm helpers
    * libmultipath: add DI_NOIO flag for pathinfo
    * libmultipath: add dm_get_multipath
    * multipath: implement "check usable paths" (-C/-U)
    * 11-dm-mpath.rules: multipath -U for READY check
    * 11-dm-mpath.rules: import more ID_FS_xxx vars from db
    * 11-dm-mpath.rules: no need to test before IMPORT
    * 11-dm-mpath.rules: handle new maps with READY==0
    * 11-dm-mpath.rules: don't set READY->ACTIVATION
    * 11-dm-mpath.rules: Remember DM_ACTIVATION
    * multipath.rules: set ID_FS_TYPE to "mpath_member"
    * kpartx.rules: don't rely on DM_DEPS and DM_TABLE_STATE
    * kpartx.rules: respect DM_UDEV_LOW_PRIORITY_FLAG
    * kpartx.rules: improved logic for by-uuid and by-label links
    * kpartx.rules: create by-partuuid and by-partlabel symlinks
    * kpartx.rules: generate type-name links only for multipath devices
    * kpartx.rules: fix logic for adding partitions
    * multipath/kpartx rules: avoid superfluous scanning
    * kpartx/del-part-nodes.rules: new udev file
    * kpartx.rules: move symlink code to other files
  - multipath-tools.spec:
    * added 68-del-part-nodes.rules to support partition deletion
    * added 00-dont-del-part-nodes.rules to disable partition deletion
    by default on openSUSE/SLES for now.
    * added 11-dm-parts.rules to kpartx package
    * added dracut.conf file to make sure 11-dm-parts.rules is included
    in initrd
* Mon Aug 14 2017
  - Update to version 0.7.2+14+suse.5721c345:
    * cli_add_map: Use CMD_NONE (bsc#1053515)
    * multipath-tools: link internal libraries before foreigns
    * multipathd daemon: Fix incorrect use of CLOCK_MONOTONIC in
    pthread (bsc#1053757)
* Fri Aug 11 2017
  - Update to version 0.7.2+11+suse.448921a2:
    * multipath.conf.5: document no_partitions compat support
    * libmultipath: fixup compat support for 'features "1 no_partitions"'
* Fri Aug 11 2017
  - Dropped 67-kpartx-compat.rules (SUSE legacy).
    * symlinks "/dev/mapper/${UUID}_part${X}" are not created any more,
      only     "/dev/mapper/${UUID}-part${X}" (with "minus")
  - Dropped automatic kpartx invocation on dmraid devices (fate#323743)
  - Rebase to upstream multipath-tools 0.7.2:
    * libmultipath: retain_attached_hw_handler obsolete with 4.3+
    * multipath-tools: move up TEMPLATE in hwtable
    * multipath-tools: delete libdmmp/docs/man directory in make clean
    * libmultipath: fix unit to seconds in log message for checker timeout
    * multipath-tools: add HPE StoreVirtual 3200 family to hwtable
    * multipath-tools: add HPE MSA 2050/2052 to hwtable
    * multipath-tools: add/change fujitsu arrays
    * multipath-tools: check sysfs path state for NVMe/NVMf
    * multipath-tools: sync third-party headers with 3.13 upstream
    * multipath-tools: beautify path_latency.c code
    * multipath-tools: fix format in multipath.conf.5
    * libmultipath: update 3PARdata builtin config
    * Bump version to 0.7.2
  - Update to version 0.7.2+8+suse.95e8f43e:
    * libmultipath: don't try to set hwhandler if it is retained
    * libmultipath: don't [un]set queue_if_no_path after domap
    * kpartx/devmapper.h: remove dm_no_partitions
    * libmultipath: compat support for 'features "1 no_partitions"'
    * kpartx.rules: respect DM_UDEV_LOW_PRIORITY_FLAG
    * kpartx.rules: Use DM_ACTIVATION as condition (fate#323406)
    * kpartx.rules: skip creating by-uuid and by-label links
* Thu Jul 20 2017
  - Update to version 0.7.1+69+suse.3bfa5af1:
    * Merge branch 'sles12-sp3-fixes' into sles12-sp3
    * libmultipath: get_udev_uid: make sure pp->wwid is 0-terminated
    * libmultipath: drop uevent_can_discard_by_devpath (bsc#1048052)
    * libmultipath: only listen for uevents with DEVTYPE=disk
    * libmultipath: fix over-long NVME WWIDs
* Tue Jun 27 2017
  - Update to version 0.7.1+64+suse.aabe8c87:
    * Updated "no_path_retry" patchset to v4 (minor change)
    * kpartx.rules: Fix syntax error in skip_kpartx code (bsc#1046092)
  - _service: use "match-tag" to refer only to offical tags
* Wed Jun 21 2017
  - Update to version 0.7.1+62+suse.62a2c36e:
    * kpartx: only check for 'no_partitions' feature on dm devices
    * Revert "kpartx: use mapname if no uuid is present"
      (bsc#1037533, bsc#1033541)
  - "no_path_retry" patch series (bsc#1043027)
    * libmultipath: load_config: skip setting unnecessary defaults
    * libmultipath: add/remove_feature: use const char* for feature
    * libmultipath: clarify option conflicts for "features"
    * libmultipath: merge_hwe: fix queue_if_no_path logic
    * libmultipath: assemble_map: fix queue_if_no_path logic
    * multipath.conf.5: document no_path_retry vs. queue_if_no_path
    * multipath.conf.5: Remove ??? and other minor fixes
    * libmultipath: add deprecated warning for some features settings
  - _service: Use "sles12-sp3" branch as revision, as factory
    and SLE12-SP3 submissions are in sync. Will be changed when
    factory forks off (latest at SLE12-SP3 GA).
* Tue Jun 20 2017
  - set KBUILD_BUILD_TIMESTAMP to generate reproducible man-pages
    to fix build-compare (bsc#1045111)
* Wed Jun 14 2017
  - Update to version 0.7.1+53+suse.07c2f6ac
  - kpartx patch series from upstream (bsc#1037533, bsc#1033541)
    * kpartx: only check for 'no_partitions' feature on dm devices
    * kpartx: test-kpartx: new unit test program
    * kpartx: remove is_loop_device
    * kpartx: relax and improve UUID check in dm_compare_uuid
    * kpartx: dm_remove_partmaps: support non-dm devices
    * kpartx: dm_devn: return error for non-existent device
    * kpartx: don't treat multi-linear mappings as partitions
    * libmultipath: don't treat multi-linear mappings as partitions
    * kpartx: use partition UUID for non-DM devices
    * kpartx: use absolute path for regular files
    * kpartx: find_loop_by_file: use sysfs
    * kpartx: include sys/sysmacros.h
    * Revert "kpartx: relax check when checking for a kpartx device"
  - Spec file: use new build flag for libdmmp installation
    (bsc#1036652), enabled by upstream fix:
    * libdmmp: enable library installation in alternative directory
  - Other bug fixes from upstream:
    * libmultipath: print.c: make sure lines are 0-terminated (bsc#1038865)
    * multipath-tools: fix compilation with gcc < 4.9
    * kpartx: fix device checks
    * mpath_persist: Don't join threads that don't exist
    * libmultipath: fix suspended devs from failed reloads
    * mpathpersist: fix one more crash possiblity
  - Minor upstream changes:
    * multipath: Merge the DELL MD3xxx device configs
    * multipath: fix up position independent code
    * libmultipath: fix partition detection (bsc#1037533)
    * kpartx: default to running in sync mode
    * libmultipath: force udev reloads
    * libmultipath: print alias with no_path_retry message
    * multipathd: force reload device on all resizes
    * libmultipath: refactor calls to get dm device info
    * multipath-tools: document uid_attribute for NVME devices
    * Makefile: Remove assignments to unused variables
    * libmultipath/configure.h: Add a forward declaration
    * libmpathpersist: Add two missing #include directives
    * Remove mpath_reverse_8bytes_order()
    * Move the declaration of mpath_mx_alloc_len to a header file
    * Remove a superfluous "extern" keyword
    * mpathpersist.8: add missing documentation for -K, -C, -l
* Thu Apr 27 2017
  - spec file: Disable RADOS support for i586 on Leap 42.x (bsc#1036271)
  - spec file: Move libdmmp to /usr/lib[64] (bsc#1036652)
  - Update to version 0.7.1+7+suse.3edc5f7d:
    * kpartx: use mapname if no uuid is present (bsc#1033541)
    * kpartx: relax check when checking for a kpartx device (bsc#1033541)
    * libmpathpersist: use extern struct udev (bsc#1027188)
    * kpartx: include sys/sysmacros.h (fix compilation warning)
  - Update to upstream version 0.7.1:
    * multipath-tools: improve processing efficiency for addition and deletion of multipath devices
    * uevent_can_discard: optimize devpath check
    * multipathd: fix SIGUSR2 handling
    * multipath-tools: clean up libdmmp/Makefile
    * multipath-tools: libdmmp: Fix incorrect use of __attribute__
    * multipath-tools: Remove trailing whitespaces
    * multipath-tools: add missing "-l" flag for pthread in libdmmp/Makefile
    * multipath-tools: build objects for libdmmp and libmpathpersist independently
    * libdmmp: minor Makefile cleanup
    * multipath-tools: remove incdir from Makefiles
    * libdmmp: don't disconnect from multipathd twice
    * multipathd: don't call strlen on NULL variables
    * libdmmp: move libdmmp.pc install location
    * multipathd: drop lock before calling uev_add_path
    * multipathd: allow devices to switch from RW to RO
    * libmultipath: don't set max_sectors_kb on reloads
    * Remove a trailing tab
    * multipath: fix segfault with disable_changed_wwids
    * multipath-tools: amend text from multipath/multipath.conf.5
    * Bump the version code and date
    * multipath-tools: replace multipath configuration output
    * Revert "multipathd: set timeout for CLI commands correctly"
    * libmultipath: fix skip_kpartx support for removing maps
    * Bump version to 0.7.1
* Fri Mar 24 2017
  - spec file changes suggested by factory review team (bsc#1030699)
    * RPM group adjustments.
    * Avoid %__ macro indirections
* Thu Mar 23 2017
  - Enable rados for SLES only for x86_64 and aarch64 (ceph is currently
    disabled on SLES on s390x and ppc64le) (bsc#1030699)
  - Downgrade to version 0.6.4+103+suse.bcb5d0f4:
    * temporarily remove commit "multipathd: fix SIGUSR2 handling"
    until it's merged in official repo (bsc#1030699)
* Tue Mar 21 2017
  - Spec file: disable librados for architectures for which ceph
    is not built
  - Spec file: enable librados by default for SLES12 SP3, disable
    it on Leap <= 42.1
  - Update to version 0.6.4+104+suse.ac0df678:
    * multipathd: fix SIGUSR2 handling
* Fri Mar 10 2017
  - Update to version 0.6.4+103+suse.bcb5d0f4:
    * changed to official github repo openSUSE/multipath-tools
      (no changes code-wise)
* Fri Mar 10 2017
  - Spec file: Added dependency on sg3_utils (boo#1028857)
* Wed Mar 01 2017
  - spec file changes: optional librados and libdmmp support
    * enabled by default on Factory and Leap
      (disable with --without-rados, --without-libdmmp)
    * disabled by default on SLES12
      (enable with --with-rados, --with-libdmmp)
    * libdmmp0_1_0 and libdmmp-devel as separate packages
    * minor fixes for RPMLINT warnings
  - Update to version 0.6.4+102.0119472d:
    * rebased, code-wise identical to previous checkout
* Tue Feb 28 2017
  - Update to version 0.6.4+102.df7d367e:
    * libmultipath/propsel: Do not select sysfs prioritizer for RDAC arrays
* Tue Feb 28 2017
  - Update to version 0.6.4+101.f01ef4da (SLES12 SP2 changes wrt upstream):
    * Make libdmmp build optional
    * multipath.rules: use -i flag to multipath
    * kpartx: create symlinks for dmraid devices
    * kpartx: Add udev compability rules for SUSE
    * libmultipath/checkers: make RADOS checker optional
    * multipathd: fixup check for new path states (bsc#1019798)
    * tur: Add pthread_testcancel() (bsc#101979)
    * kpartx: sanitize delete partitions (bsc#100869)
    * libmultipath: coalesce_paths: trigger uevent if nothing done
      (bsc#998906, bsc#998893, bsc#1005763, bsc#1011400)
    * libmultipath: differentiate ACT_NOTHING and ACT_IMPOSSIBLE
      (bsc#998906, bsc#998893, bsc#1005763, bsc#1011400)
    * libmultipath: reload map if not known to udev
      (bsc#998906, bsc#998893, bsc#1005763, bsc#1011400)
    * libmultipath: sysfs_attr_set_value: use const char*
      (bsc#998906, bsc#998893, bsc#1005763, bsc#1011400)
    * libmultipath: select_action: check special features separately
      (bsc#998906, bsc#998893, bsc#1005763, bsc#1011400)
    * libmultipath: disassemble_map: treat aminio like assemble_map does
      (bsc#998906, bsc#998893, bsc#1005763, bsc#1011400)
    * libmultipath: disassemble_map: skip no_path_retry check
      (bsc#998906, bsc#998893, bsc#1005763, bsc#1011400)
    * libmultipath: setup_feature: handle "retain_attached_hw_handler"
      (bsc#998906, bsc#998893, bsc#1005763, bsc#1011400)
    * libmultipath: setup_feature: print log msg if no_path_retry cant be set
      (bsc#998906, bsc#998893, bsc#1005763, bsc#1011400)
    * libmultipath: setup_features: log msg if queue_if_no_path is ignored
      (bsc#998906, bsc#998893, bsc#1005763, bsc#1011400)
    * multipathd: use weaker "force_reload" at startup
      (bsc#998906, bsc#998893, bsc#1005763, bsc#1011400)
    * multipathd: imply -n if find_multipaths is set (bsc#1012910)
    * multipath: ignore -i if find_multipaths is set (bsc#1012910)
    * libmultipath: move suspend logic to _dm_flush_map (bsc#986838)
    * multipath -ll: set DI_SERIAL (bsc#991432)
    * libmultipath: use existing alias from bindings file (bsc#1005255)
    * libmultipath/discovery: do not cache 'access_state' sysfs attribute (bsc#1004858)
    * multipathd: issue systemd READY after initial configuration (bsc#1006469)
    * multipath: avoid crash when using modified configuration (bsc#1000914)
    * multipathd: Set CLI timeout correctly (bsc#999061)
    * libmultipath: Do not crash on empty features (bsc#994812)
    * libmultipath: fall back to search paths by devt (bsc#995645)
    * multipathd: set timeout for CLI commands correctly (bsc#999061)
    * Invalid error code when using multipathd CLI
    * multipath: do not check daemon from udev rules (bsc#986734)
    * Add support for "multipath=off" and "nompath" on kernel cmdline
    * multipathd: start daemon after udev trigger (bsc#98673)
    * multipathd.service: fixup Wants= and Before= statements (bsc#1019181, bsc#991742, bsc#986734)
  - Update to current upstream (0.6.4-65-ga2675025)
    * Avoid that reloading a map sporadically triggers I/O errors
    * fix udev rules for failed multipath devices
    * multipathd: allow resetting stats
    * multipathd: add messages on delayed path addition
    * multipathd: don't update priority of failed paths
    * libmultipath: cleanup orphan device states
    * libmultipath: add detect_checker option
    * kpartx: don't keep creating recursive partitions
    * multipath-tools: Introducing multipath C API
    * multipath-tools: sync valgrind.h with 3.12 upstream
    * multipath-tools: add availability of service-time and queue-length to multipath.conf.5
    * multipath-tools: add availability of service-time and queue-length to multipath.conf.5
    * Fill NVMe specific path info
    * Don't blacklist nvme
    * multipath-tools: fix misspellings
    * multipath-tools: git should ignore rej and orig files
    * Include sys/sysmacros.h
    * Tolerate modprobe failures in multipathd.service
    * multipath-tools: Remove trailing and leading whitespaces
    * multipath-tools: Perform socket client uid check on IPC commands.
    * multipath-tools: Set errno mpath_recv_reply() when failure
    * multipath-tools: New way to limit the IPC command length.
    * multipath-tools: libmultipath: Removed unused functions.
    * multipath-tools: libmultipath: fix gcc link failure on rcu_register_thread_mb.
    * multipath-tools: multipathd: Fix memory leak on load_config().
    * [multipathd] Remove trailing whitespaces
    * multipathd: deterministic io throughput in multipath
* Sat Feb 18 2017
  - Remove superfluous PreReq for insserv and fillup
* Thu Sep 29 2016
  - Update to version 0.6.2+suse20160928.8939fb6
* Thu Sep 29 2016
  - Implement support for 'multipath=off' and 'nompath'
    kernel commandline options (bsc#1001691)
* Wed Sep 28 2016
  - multipath: avoid crash when using modified configuration
* Mon Sep 19 2016
  - libmultipath: Do not crash on empty features (bsc#994812)
  - multipathd: Set CLI timeout correctly (bsc#999061)
  - Moved multipath-tools repository to
* Thu Sep 08 2016
  - Fixup glitch from patch 'fixup check from udev rules' (bsc#986734)
  - Remove 0001-libmultipath-fall-back-to-search-paths-by-devt.patch;
    integrated into git repository
* Mon Aug 29 2016
  - libmultipath: fall back to search paths by devt (bsc#995645)
* Fri Aug 26 2016
  - Fixup module name in /usr/lib/modules-load.d (bsc#986734)
* Fri Aug 26 2016
  - multipath: fixup check from udev rules (bsc#986734)
* Wed Aug 24 2016
  - multipathd: start daemon after udev trigger (bsc#986734)
  - Load device handler and multipath module at boot (bsc#991634)
* Fri Aug 19 2016
  - Do not check daemon from udev rules (bsc#986734,bsc#990538)
* Fri Aug 05 2016
  - Include fixes from upstream:
    * memory leak in orphan_paths
    * More hardware table cleanups
    * Add 'serial' keyword to weightedpath prioritizer
  - Set timeout for CLI commands correctly (bsc#990265)
  - Start daemon after udev trigger (bsc#991742,bsc#986734,bsc#990538)
  - multipathd.service: Fixup Wants= and Before= statements
    (bsc#991742, bsc#986734)
* Thu Jul 28 2016
  - Include patches from upstream:
    * Cleanup hardware tables by removing default entries
    * More formatting fixes
    * Order keywords in multipath.conf.5
    * Change default pgpolicy from 'failover' to 'group_by_prio'
    * kpartx: Fix check whether to detach a loop device
    * Fix partly traversed loop in coalesce_paths()
    * Fix memory leak in reconfigure()
    * Cleanup include header files
    * Bump version code to 0.6.2
  - Fix multipath -l <devmap> without output (bsc#990480)
  - Fix spelling in a log message
  - Fix type of rcu_unregister()
  - Do not perform POSIX mutex operations inside a signal handler
  - Ensure that signals are delivered to the uxsock thread
  - Fix memory leak in path group policies
  - Update tarball to 0.6.2+suse20160728.d96f423
* Fri Jul 15 2016
  - Include patches from upstream:
    * Makefile cleanup
    * Update multipath.conf.5
    * Update hardware tables
    * Whitespace cleanup
  - Fixup crash during shutdown (bsc#988539)
  - Update tarball to 0.6.1+suse20160715.3d44636
* Mon Jul 04 2016
  - Remove obsoletes spec sections
* Mon Jul 04 2016
  - Move config accesses to use user-space RCU (bsc#987526)
    * Revert 'move filter_devnode under vector lock'
    * Revert the rework patch
  - Include patches from upstream:
    * Update hardware tables
    * Update kpartx manpage
    * Whitespace fixes
    * Include coverity fixes
    * Drop AUTHOR file
  - Update tarball to 0.6.1+suse20160704.6e52398
* Wed Jun 08 2016
  - fix service file to not pretend that this is the upstream version.
    Now labeled 0.6.1+suse20160603.9b920e3
  - Fix BuildRequire to get systemd.pc from correct package (bsc#983167)
  - point rcmultipathd to /usr/sbin/service to avoid dangling symlink warning
* Fri Jun 03 2016
  - Rework patch 'move filter_devnode under vector lock'
* Mon May 30 2016
  - multipathd: Fixup definition of set_unlocked_handler_callback()
  - mpathcmd.h: Update Free Software Foundation address
* Fri May 27 2016
  - Do not install header file with mode 755
* Wed May 25 2016
  - Update to latest upstream version 0.6.1
    * Merge suse-specific patches
    * Drop multipath.conf.* files
    * Update to version 0.6.1
    * multipathd: move 'filter_devnode' under vector lock
    * libmultipath: use poll() in uevent_listen()
    * Increase kpartx retries
    * Merge Dell MD3XXX hardware table entries
    * multipathd: Add 'sysfs' prioritizer (bsc#927040)
    * libmultipath: call get_vpd_uid() if no uid_attribute is set
    * multipathd: update defaults
* Fri May 06 2016
  - Update to latest upstream version 0.6.0 (FATE#319406)
    * Update documentation
    * Fix memory leak and segfault in reconfigure
    * Add wwn keyword to weightedpath prioritizer
    * Use 64-bit int for command key
    * check partions unused before removing
    * print 'fail' when remove fails
    * add exclusive_pref_bi for alua prioritizer
    * kpartx: verify parition devices
    * multipathd: delay reloads during creation
    * Cut down alua prioritizer ioctls
    * Add 'ignore_new_boot_devs' option
    * Add libmpathcmd library and use it internally
    * retrigger uevents to try and grab uid
    * Update to version 0.6.0
* Fri Apr 15 2016
  - Port to latest upstream version (FATE#319406, FATE#320255)
    * kpartx: support device names with spaces
    * add raw format multipathd commands
    * make kpartx -d remove all partitions
    * Add find_multipaths option
    * Autodetect ALUA CLARiiON configurations
    * Delayed path reintegration
    * enable configuration directory
    * read-only bindings
    * Add deferred_remove support
    * correctly set partition delimiter on rename
    * Add overrides section to multipath.conf
    * Add additional path wildcards
    * Add force_sync option
    * Misc small patches
* Thu Mar 24 2016
  - multipathd: do not flush maps on startup
  - Use find_path_by_dev() where possible (bsc#924316)
  - Fixup error return in store_path() (bsc#972329)
  - Do not display message 'invalid fd'
* Tue Mar 08 2016
  - Fixup overzealous warning 'empty device number' (bsc#969857)
* Wed Feb 17 2016
  - multipathd: fixup signal handling (again)
  - Revert 'trigger all devices on startup'
  - multipathd: print error message for invalid arguments
  - multipathd: block checkerloop during reconfiguration (bsc#946658)
  - libmultipath: correctly initialize pp->sg_id
  - multipathd: don't buffer output with systemd (bsc#954726)
  - multipath.rules: Do not forward partition events (bsc#954726)
  - libmultipath: improve uxlsnr handling (bsc#954726)
  - multipathd: do not realloc memory in uxlsnr (bsc#954726)
  - libmultipath: call get_uid() for all paths (bsc#935312)
  - multipathd: Do not print misleading message 'not found in pathvec'
  - multipathd: Do not update the paths vec when removing paths
  - multipathd: Do not switch paths on empty multipath tables (bsc#956349)
  - libmultipath: remove 'get_info' argument for adopt_paths()
  - libmultipath: ensure 'dev_t' is set when store paths (bsc#924316)
  - libmultipath: Do not store paths with empty dev_t (bsc#924316)
  - libmultipath: Do not store paths with empty device name (bsc#924316)
  - libmultipath: sysfs_set_rport_tmo still wrong (bsc#926588)
  - Add LIO-ORG/SUSE RBD backend hardware defaults (bsc#947845)
  - multipath: Reset alias if renaming fails (bsc#943157)
* Fri Nov 06 2015
  - Fixes for md_monitor on zFCP (FATE#319070):
    * strict loop timings
    * multipathd: fixup a crash when invoking CLI commands
    * multipathd: implement 'show map $map format $format
* Tue Aug 25 2015
  - Fixup hang in 'multipath -f' (bsc#941954)
* Mon Aug 03 2015
  - Create package for SLE12-SP1.
    * Remove multipath-tools-0.5.0-sles12.diff.bz2
    * Add multipath-tools-0.5.0-sles12-sp1.diff.bz2
  - kpartx: parse emulated DASD devices
  - multipathd: Fixup queueing mode in 'show maps status' (bsc#933885)
  - multipathd: Accept zero-sized paths in ev_add_path
  - Always set DM_UDEV_DISABLE_LIBRARY_FALLBACK (bsc#933282)
  - libmultipath: Fixup 'DM_DEVICE_RELOAD' handling (bsc#933282)
  - libmultipath: correctly display checker status
* Wed Apr 08 2015
  - Remove 'udev_sync' argument from dm_simplecmd (bsc#903001)
  - Ensure multipathd is started before systemd-udev-trigger
* Tue Apr 07 2015
  - Only import ID_FS_XXX variables if not set (bsc#909358)
  - Fixup regular expression for HP MSA 2040 (bsc#920189)
* Wed Mar 18 2015
  - Add dependency on systemd-udevd.service (bsc#903001)
  - Use ALUA for HP 3PAR (bsc#922105)
  - Add DX8700 S3 and DX8900 S3 defaults (bsc#921703)
  - Load all device handler modules on startup (bsc#908529)
* Fri Mar 13 2015
  - libmultipath: make vpd page 0x80 optional (bsc#917963)
  - Add HP MSA 2040 to the hardware table (bsc#920189)
  - Revert 'Skip unhandled device types' (bsc#917701)
* Thu Jan 29 2015
  - skip uninitialized devices during reconfiguration (bnc#908915)
  - memory overflow when printing help text (bnc#909742)
* Tue Dec 16 2014
  - Do not automatically fall back to vpd uid generation
  - Improve vpd parsing
  - multipathd: trigger all devices on startup (bnc#901465)
  - Unset 'uid_attribute' on failure
* Wed Dec 10 2014
  - libmultipath: Fall back to SG_IO if no UID could be assigned
  - Assign local priority for NAA VPD descriptor (bnc#907483)
  - libmultipath: finally fix dev_loss_tmo setting (bnc#889927)
  - libmultipath: Do not use 'sscanf' for parsing integers (bnc#889927)
  - devmapper: do not flush I/O for DM_DEVICE_CREATE (bnc#901809)
  - kpartx: handle more than 256 loop devices (bnc#898427)
  - multipathd: fixup locking in uev_remove_map() (bnc#901891)
  - multipathd: use global variable for uxsock timeout (bnc#900758)
  - multipathd: remove unused variable in cli_reconfigure()
  - Add %service calls for multipathd.socket



Generated by rpm2html 1.8.1

Fabrice Bellet, Tue Jul 9 18:25:27 2024