| Index | index by Group | index by Distribution | index by Vendor | index by creation date | index by Name | Mirrors | Help | Search |
| Name: tcpdump | Distribution: openSUSE 12.2 |
| Version: 4.3.0 | Vendor: openSUSE |
| Release: 2.1.2 | Build date: Mon Jul 16 18:33:35 2012 |
| Group: Productivity/Networking/Diagnostic | Build host: build09 |
| Size: 1651678 | Source RPM: tcpdump-4.3.0-2.1.2.src.rpm |
| Packager: http://bugs.opensuse.org | |
| Url: http://www.tcpdump.org/ | |
| Summary: A Packet Sniffer | |
This program can "read" all or only certain packets going over the ethernet. It can be used to debug specific network problems.
BSD-3-Clause
* Thu Jun 14 2012 jslaby@suse.de
- update to 4.3.0
- fixes for forces: SPARSE data (per RFC 5810)
- some more test cases added
- updates to documentation on -l, -U and -w flags.
- Fix printing of BGP optional headers.
- Tried to include DLT_PFSYNC support, failed due to headers required.
- added TIPC support.
- Fix LLDP Network Policy bit definitions.
- fixes for IGMPv3's Max Response Time: it is in units of 0.1 second.
- SIGUSR1 can be used rather than SIGINFO for stats
- permit -n flag to affect print-ip for protocol numbers
- ND_OPT_ADVINTERVAL is in milliseconds, not seconds
- Teach PPPoE parser about RFC 4638
* Tue Jan 03 2012 puzel@suse.com
- update to 4.2.1
- Only build the Babel printer if IPv6 is enabled.
- Support Babel on port 6696 as well as 6697.
- Include ppi.h in release tarball.
- Include all the test files in the release tarball, and don't
"include" test files that no longer exist.
- Don't assume we have <rpc/rpc.h> - check for it.
- Support "-T carp" as a way of dissecting IP protocol 112 as CARP
rather than VRRP.
- Support Hilscher NetAnalyzer link-layer header format.
- Constify some pointers and fix compiler warnings.
- Get rid of never-true test.
- Fix an unintended fall-through in a case statement in the ARP
printer.
- Fix several cases where sizeof(sizeof(XXX)) was used when just
sizeof(XXX) was intended.
- Make stricter sanity checks in the ES-IS printer.
- Get rid of some GCCisms that caused builds to fail with compilers
that don't support them.
- Fix typo in man page.
- Added length checks to Babel printer.
- drop tcpdump-4.2.0-ppi.patch (upstream)
* Mon Nov 28 2011 vcizek@suse.com
- update to 4.2.0
* patch that adds missing ppi.h
* Summary for 4.2.0
- merged 802.15.4 decoder from Dmitry Eremin-Solenikov <dbaryshkov
at gmail dot com>
- updates to forces for new port numbers
- Use "-H", not "-h", for the 802.11s option. (-h always help)
- Better ICMPv6 checksum handling.
- add support for the RPKI/Router Protocol, per -ietf-sidr-rpki-rtr-12
- get rid of uuencoded pcap test files, git can do binary.
- sFlow changes for 64-bit counters.
- fixes for PPI packet header handling and printing.
- Add DCB Exchange protocol (DCBX) version 1.01.
- Babel dissector, from Juliusz Chroboczek and Grégoire Henry.
- improvements to radiotap for rate values > 127.
- Many improvements to ForCES decode, including fix SCTP TML port
- updated RPL type code to RPL-17 draft
- Improve printout of DHCPv6 options.
- added support and test case for QinQ (802.1q VLAN) packets
- Handle DLT_IEEE802_15_4_NOFCS like DLT_IEEE802_15_4.
- Build fixes for Sparc and other machines with alignment restrictions.
- Merged changes from Debian package.
- PGM: Add ACK decoding and add PGMCC DATA and FEEDBACK options.
- Build fixes for OSX (Snow Leopard and others)
- Add support for IEEE 802.15.4 packets
* Summary for 4.1.2 tcpdump release
- If -U is specified, flush the file after creating it, so it's
not zero-length
- Fix TCP flags output description, and some typoes, in the man
page
- Add a -h flag, and only attempt to recognize 802.11s mesh
headers if it's set
- When printing the link-layer type list, send *all* output to
stderr
- Include the CFLAGS setting when configure was run in the
compiler flags
* Tue Apr 06 2010 puzel@novell.com
- update to tcpdump-4.1.1
* Don't blow up if a zero-length link-layer address is passed to
linkaddr_string()
* Fix printing of MAC addresses for VLAN frames with a length
field
* Add some additional bounds checks and use the EXTRACT_ macros
more
* Add a -b flag to print the AS number in BGP packets in ASDOT
notation rather than ASPLAIN notation
* Add ICMPv6 RFC 5006 support
* Decode the access flags in NFS access requests
* Handle the new DLT_ for memory-mapped USB captures on Linux
* Make the default snapshot (-s) the maximum
* Print name of device (when -L is used)
* Print new TCP flags
* Add support for RPL DIO
* Add support for TCP User Timeout (UTO)
* Add support for non-standard Ethertypes used by 3com PPPoE gear
* Add support for 802.11n and 802.11s
* Add support for Transparent Ethernet Bridge ethertype in GRE
* Add 4 byte AS support for BGP printer
* Add support for the MDT SAFI 66 BG printer
* Add basic IPv6 support to print-olsr
* Add USB printer
* Add printer for ForCES
* Handle frames with an FCS
* Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames
* Fix TCP sequence number printing
* Report 802.2 packets as 802.2 instead of 802.3
- drop tcpdump-4.0.0-autoconf.patch (not needed with new autoconf)
- compile with -fno-strict-aliasing
* Wed Jan 14 2009 prusnak@suse.cz
- updated to 4.0.0
* Add support for Bluetooth Sniffing
* Add support for Realtek Remote Control Protocol (openrrcp.org.ru)
* Add support for 802.11 AVS
* Add support for SMB over TCP
* Add support for 4 byte BGP AS printing
* Add support for compiling on case-insensitive file systems
* Add support for ikev2 printing
* Update support for decoding AFS
* Update DHCPv6 printer
* Use newer libpcap API's (allows -B option on all platforms)
* Add -I to turn on monitor mode
* Bugfixes in lldp, lspping, dccp, ESP, NFS printers
* Cleanup unused files and various cruft
- dropped obsoleted juniper.patch (included in update)
* Tue Jan 08 2008 prusnak@suse.cz
- updated to 3.9.8
* Rework ARP printer
* Rework OSPFv3 printer
* Add support for Frame-Relay ARP
* Decode DHCP Option 121 (RFC 3442 Classless Static Route)
* Decode DHCP Option 249 (MS Classless Static Route) the same as Option 121
* TLV: Add support for Juniper .pcap extensions
* Print EGP header in new-world-order style
* Converted print-isakmp.c to NETDISSECT
* Moved AF specific stuff into af.h
* Test subsystem now table driven, and saves outputs and diffs to one place
* Require <net/pfvar.h> for pf definitions - allows reading of pflog formatted
libpcap files on an OS other than where the file was generated
* Thu Jul 26 2007 prusnak@suse.cz
- updated to 3.9.7
* NFS: Print unsigned values as such
* RX: parse safely
* BGP: fixes for IPv6-less builds
* 801.1ag: use standard codepoint
* use /dev/bpf on systems with such a device
* 802.11: print QoS data, avoid dissect of no-data frame, ignore padding
* smb: make sure that we haven't gone past the end of the captured data
* smb: squelch an uninitialized complaint from coverity
* NFS: from NetBSD; don't interpret the reply as a possible NFS reply if it got MSG_DENIED
* BGP: don't print TLV values that didn't fit, from www.digit-labs.org
* revised INSTALL.txt about libpcap dependancy
- dropped obsolete patch:
* bgp-overflow.diff (fixed in update)
* 802_11-overflow.diff (included in update)
- changed libpcap to libpcap-devel in BuildRequires
* Thu Jul 12 2007 prusnak@suse.cz
- update to 3.9.6
* added support for:
- OIF RSVP Extensions UNI 1.0 Rev. 2 and additional RSVP objects
- Message-id NACK c-type
- 802.3ah loopback ctrl msg
- Multiple-STP as per 802.1s
- rapid-SPT as per 802.1w
- CFM Link-trace msg, Link-trace-Reply msg,
- unidirectional link detection
- the olsr protocol as per RFC 3626 plus the LQ extensions from olsr.org
- variable-length checksum in DCCP, as per section 9 of RFC 4340
- per-VLAN spanning tree and per-VLAN rapid spanning tree
- Multiple-STP as per 802.1s
- the cisco propriatry 'dynamic trunking protocol'
- the cisco proprietary VTP protocol
- additional values in pflog
* changes to both TCP and IP Printer Output
* fixed a potential buffer overflow in the 802.11 printer
* print basic info about a few more Cisco LAN protocols
* mDNS cleanup
* ICMP MPLS rework of the extension code
* use the correct codepoint for the OSPF simple text auth token entry
* use safeputs to print the password
* update dhcp6 options table as per IETF standardization activities
- fixed overflow in bgp (bgp-overflow.patch) [#291356]
* Fri Mar 02 2007 prusnak@suse.cz
- fixed one byte overflow (802_11-overflow.diff) [#250163]
* Wed Jan 03 2007 prusnak@suse.cz
- update to 3.9.5
* Fixes for 64bit compiling
* Updated list of DNS RR typecodes
* Add basic support for keyed authentication TCP option
* Fix printing for 4.4BSD/NetBSD NFS Filehandles
* Add support for:
- Frame-Relay ARP
- parsing Juniper .pcap files
- FRF.16 Multilink Frame-Relay (DLT_MFR)
- PIMv2 checksum verification
- further dissection of the IPCP Compression Option
- Cisco's proposed VQP protocol
- Cisco style NLPID encapsulation
- PPP over Frame-Relay
- Address-Withdraw and Label-Withdraw Msgs
- BFD Discriminator TLV
- BGP signaled VPLS
/usr/sbin/tcpdump /usr/sbin/tcpdump.4.3.0 /usr/share/doc/packages/tcpdump /usr/share/doc/packages/tcpdump/CHANGES /usr/share/doc/packages/tcpdump/CREDITS /usr/share/doc/packages/tcpdump/LICENSE /usr/share/doc/packages/tcpdump/README /usr/share/doc/packages/tcpdump/atime.awk /usr/share/doc/packages/tcpdump/packetdat.awk /usr/share/doc/packages/tcpdump/send-ack.awk /usr/share/doc/packages/tcpdump/stime.awk /usr/share/man/man1/tcpdump.1.gz
Generated by rpm2html 1.8.1
Fabrice Bellet, Mon May 20 12:22:00 2013